HVAC · Revere, MA
How much does furnace replacement cost in Revere, MA? (2026)
In Revere, furnace replacement runs $4,950–$8,850, with most paying around $6,900 — about 28% above the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $6,900
- Typical cost
- $6,900
- Labor vs US
- +12%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Revere
- In Revere, furnace replacement runs $4,950–$8,850 — call it $6,900 for a typical job, about 28% above the national average.
- Revere labor runs +12% versus the US average — the main reason the local price differs from the national figure.
- The estimate already covers the HVAC permit — roughly $250 in Revere.
- 15 to 30 years is the usual service life, so budget for the next one before it fails.
- Roughly 5–15% comes off when you book in Spring and fall (Mar–May, Sep–Oct) instead of peak season.
- Don't price this without checking the rebates section below — federal 25C/25D credits and local utility incentives can bring the net cost down.
What goes into the price in Revere
A typical Revere furnace replacement of $6,900 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Revere 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $1,900 – $3,450 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $2,800 – $5,150 |
| Permit & feesThe HVAC permit fee for this metro, based on local rates. | $250 |
| Total installed cost | $4,950 – $8,850 |
Split from the Revere estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Revere
- Labor in Revere runs about 12% above the national average (based on price levels for the Boston-Cambridge-Newton metro area), which raises the installed price.
- The cold climate in Revere adds roughly 8% to typical furnace replacement pricing versus a neutral climate.
- Revere's HVAC permit runs roughly $250, which is already part of the number above.
Furnace Replacement cost by home size in Revere
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Revere 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,700 – $6,650 |
| 1,500 sq ft (≈68,000 BTU) | $4,300 – $7,650 |
| 2,000 sq ft (≈90,000 BTU) | $4,950 – $8,850 |
| 2,500 sq ft (≈110,000 BTU) | $5,650 – $10,100 |
| 3,000 sq ft (≈130,000 BTU) | $6,400 – $11,350 |
| 3,500+ sq ft (≈150,000 BTU) | $7,150 – $12,550 |
National size ranges localized to Revere labor and climate.
Furnace Replacement cost by type in Revere
| Gas furnace | $4,800 – $8,750 |
| High-efficiency gas furnace | $4,300 – $8,750 |
| Electric furnace | $2,700 – $5,800 |
Adjusted to Revere from national type-level ranges.
Furnace Replacement cost by efficiency in Revere
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,950 – $7,000 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $4,950 – $8,850 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $6,400 – $11,950 |
Labor vs. materials in Revere
Install crew, removal, permit & startup — the part Revere rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $6,900 Revere project; your mix varies with scope.
Skilled installers in the Boston-Cambridge-Newton area earn about $38.4/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.
How we estimate it
| National range | $3,800 – $7,000 |
| Revere labor adjustment | ×1.14 |
| cold climate factor | ×1.08 |
| Local permit | +$250 |
| Revere estimate | $4,950 – $8,850 |
Promo prices vs. the real cost
Installers advertise low teaser prices to win the visit — keep them separate from the real installed cost above:
- "Free" replacement estimate$0 — it's a sales visit
- Seasonal tune-up promo$79–$129
- Service call / diagnostic fee$75–$150
- Financing offers$0 down · 0% APR, 12–60 mo
Additional furnace replacement costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Installation labor and basic ductwork connections
- Removal and disposal of the old unit
- The furnace unit and burner assembly
- Thermostat connection and system startup/testing
What affects the cost
- Whether a chimney liner or new gas line is required
- Condition of existing ductwork and venting
- Fuel type (gas vs electric) and AFUE efficiency rating
- Heating capacity (BTU) needed for your square footage
Ways to save on furnace replacement in Revere
- Get at least 3 quotes — installed prices vary widely
- Schedule in the off-season (spring/summer) for better rates
- Look for utility rebates on high-efficiency models
- Right-size the unit; oversizing wastes money and cycles hard
How long does furnace replacement last in Revere?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Revere
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Revere?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Massachusetts
HEAR liveMost 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
- Mass Save — Heat Pumps ↗Massachusetts utilities
Up to $10,000 for a whole-home heat pump (no income limit) plus 0% HEAT Loan financing.
Status: Mass Save rebates are utility-funded and run year-round; the income-based HEAR top-up launched in 2025.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Revere
Installers cut prices in spring and fall because job volume drops and crews sit idle — the opposite happens during a summer heat wave or winter cold snap, when a dead system forces homeowners into a full-price emergency swap.
Why furnace replacement quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
- One quote bundles ductwork, electrical, permit and old-unit removal; another quietly leaves them out.
- Brand, warranty length and whether startup/commissioning is included all move the number.
Get an apples-to-apples bid
- Require an itemized quote splitting equipment, labor, permit and add-ons.
- Insist on a Manual J load calculation, not a square-footage guess.
- Get at least three written bids before you sign.
- Confirm old-unit removal, the permit and startup testing are all included.
Questions to ask Revere HVAC pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Revere
How much does furnace replacement cost in Revere, MA?
For Revere homeowners, furnace replacement typically falls between $4,950 and $8,850 in 2026, averaging close to $6,900. Strip out Revere's labor rates, its cold climate and permit fees and you'd be left with a national average — this range keeps them in.
Is furnace replacement more expensive in Revere than average?
Revere comes in about 28% higher than the national average. The main reason is labor: it indexes at 1.14 relative to the national average., before the HVAC permit, which runs about $250.
Do I need a permit for furnace replacement in Revere?
Do you need a permit? For this work in Revere, yes — a HVAC permit at roughly $250, and the estimate above already carries it.
What affects furnace replacement cost the most?
Replacing a residential furnace, including the unit and installation labor. Your cold climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Revere using the BLS metro wage data labor index (×1.14 here), the IECC cold-climate factor (×1.08) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Revere furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Revere
Often done together with furnace replacement in Revere
Bundling these shares labor and setup — and a single visit.
Homeowners in Revere often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Revere
Browse local 2026 costs for every home project in Revere, MA.