Windows · Irving, TX
How much does wood and fiberglass window replacement cost in Irving, TX? (2026)
In Irving, wood and fiberglass window replacement runs $10,050–$24,950, with most paying around $17,500 — in line with the national average. Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $17,500
- Typical cost
- $17,500
- Labor vs US
- +3%
- Climate
- Hot
- Local permit
- $125
Refine your estimate
Tune it to your home to narrow the wood and fiberglass window replacement range.
Key takeaways for Irving
- $10,050 on the low end, $24,950 on the high — wood and fiberglass window replacement in Irving averages $17,500, in line with the national average.
- Running +3% against the US average, Irving labor is what moves this price off the national figure.
- The estimate already covers the Windows permit — roughly $125 in Irving.
- Schedule the replacement early — this typically holds up 30–50 years, and an emergency swap costs full price.
- Cheapest time to buy: Late fall and winter — roughly 5–15% off peak-season pricing.
- Federal 25C/25D credits plus utility rebates sit below and can shave the final bill; the estimate here is pre-incentive.
What goes into the price in Irving
A typical Irving wood and fiberglass window replacement of $17,500 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Irving 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $4,450 – $11,150 |
| Labor & installationRemoval, install and startup labor — the line most affected by where you live. | $5,475 – $13,675 |
| Permit & feesThe Windows permit fee for this metro, based on local rates. | $125 |
| Total installed cost | $10,050 – $24,950 |
Split from the Irving estimate using a 55% local-labor share; line items sum to the total.
Why wood and fiberglass window replacement costs what it does in Irving
- Irving's labor rates sit about 3% higher than the national average (based on price levels for the Dallas-Fort Worth-Arlington metro area), pushing the price up.
- The hot climate in Irving adds roughly 2% to typical wood and fiberglass window replacement pricing versus a neutral climate.
- Irving's Windows permit runs roughly $125, which is already part of the number above.
Wood & Fiberglass Window Replacement cost by number of windows in Irving
Wood and fiberglass windows are a premium upgrade — figure roughly $800–$2,500 per window installed depending on material, size, and finish. Cost scales with the number of openings, and wood typically runs higher than fiberglass.
| number of windows | Irving 2026 range |
|---|---|
| 5 windows | $4,600 – $11,050 |
| 10 windows | $9,050 – $20,000 |
| 15 windows | $13,550 – $27,950 |
| 20 windows | $18,000 – $35,900 |
| 25+ windows (whole home) | $22,000 – $44,850 |
National size ranges localized to Irving labor and climate.
Wood & Fiberglass Window Replacement cost by type in Irving
| Fiberglass | $10,000 – $21,900 |
| Composite | $11,000 – $22,900 |
| Aluminum-clad wood | $13,000 – $26,850 |
| Solid wood | $14,000 – $29,800 |
Adjusted to Irving from national type-level ranges.
Wood & Fiberglass Window Replacement cost by efficiency in Irving
Frame material sets the price and the look. Fiberglass is durable and low-maintenance; wood (often clad in aluminum outside) offers the richest appearance but costs more. The glass package adds on top. Prices are per window installed.
| Fiberglass frame (double-pane low-E)Strong, stable, very low maintenance | $700 – $1,500 |
| Wood frame / aluminum-clad woodPremium look; needs periodic finishing | $1,100 – $2,300 |
| Triple-pane premium (wood or fiberglass)Top efficiency and sound control | $1,500 – $2,900 |
Labor vs. materials in Irving
Install crew, removal, permit & startup — the part Irving rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $17,500 Irving project; your mix varies with scope.
Skilled installers in the Dallas-Fort Worth-Arlington area earn about $29.7/hr (5% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your wood and fiberglass window replacement cost.
How we estimate it
| National range | $10,000 – $25,000 |
| Irving labor adjustment | ×0.97 |
| hot climate factor | ×1.02 |
| Local permit | +$125 |
| Irving estimate | $10,050 – $24,950 |
Promo prices vs. the real cost
Advertised window pricing quotes the unit and skips the labor that makes it watertight. Measure the ad against the full installed number above, not the sticker on the glass:
- Free in-home estimate$0 — it's a sales visit
- "From $189/window" teaserinstall, trim & disposal usually extra
- Financing offers$0 down · 0% APR, 12–60 mo
- "Buy 2, get 2" / BOGO dealsdiscount is off an inflated list price
Additional wood and fiberglass window replacement costs to budget for
Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.
| Old window removal & disposalPer window; usually bundled into the quote | $30 – $75 |
| Full-frame (vs. insert/pocket) replacementPer window; standard for wood to flash properly | $150 – $450 |
| Rotted sill / frame repairPer opening, found after removal | $200 – $800 |
| Custom or non-standard size / shapeBay, bow, arched, or oversized units cost more | $200 – $1,000 |
| Interior/exterior trim, casing & stainingPer window; wood often gets a stained finish | $100 – $400 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Installation, flashing and sealing
- Interior and exterior trim
- Premium wood or fiberglass windows
- Old window removal
What affects the cost
- Historic or architectural matching
- Custom sizing and shapes
- Number of windows
- Material (fiberglass vs solid wood vs clad)
Ways to save on wood and fiberglass window replacement in Irving
- Use premium only where visible, vinyl elsewhere
- Check efficiency rebates
- Bundle the whole house in one job
- Fiberglass costs less than wood with similar looks
How long does wood and fiberglass window replacement last in Irving?
Fiberglass lasts 30–50+ years; well-maintained wood can match it, but neglected wood rots far sooner.
Fiberglass is nearly maintenance-free. Wood (and the exterior of clad units) needs periodic repainting or re-staining and seal checks.
Signs you need wood and fiberglass window replacement in Irving
- Windows stick, swell, or are hard to open and close
- Fog or condensation appears between the panes (the seal has failed)
- Wood frames show rot, soft spots, peeling paint, or water staining
- You feel drafts near the window when it's shut
- They're single-pane originals and energy bills are high
- Visible warping, cracking, or daylight around the sash
- Outside noise comes through easily
Repair or replace in Irving?
Repair if…
- The wood frame is structurally sound and just needs refinishing or minor rot repair
- Only the seal, weatherstripping, or hardware has failed
- It's a historic or character window worth restoring
- The unit is under warranty
Replace if…
- Condensation is sealed between the panes (the IGU seal is gone)
- Rot has spread into the structural frame or sill
- They're single-pane and you want major energy savings
- Several windows are failing — bulk replacement lowers per-window cost
Climate-zone spec
What window rating you need in Irving, TX
Irving, TX sits in a hot climate — the Southern ENERGY STAR window zone. To qualify for ENERGY STAR (v7.0), replacement windows here should meet:
In hot climates, the solar heat gain coefficient (SHGC) is the number that matters — a low SHGC blocks summer heat and cuts cooling bills far more than a rock-bottom U-factor.
Thresholds from ENERGY STAR Residential Windows v7.0. Costadia groups cities into cold / mixed / hot bands — for your exact county's zone, use the ENERGY STAR Climate Zone Finder. Source.
Rebates & incentives
The federal window tax credit is gone for 2026, but ENERGY STAR windows can still earn utility rebates in some areas — and the real long-run savings come from lower heating and cooling bills.
- The federal 25C tax credit (up to $600/yr for ENERGY STAR Most Efficient windows) ended December 31, 2025 under the One Big Beautiful Bill Act — not available for 2026.
- Some utilities still rebate high-efficiency windows — real examples include Mass Save (~$75/window on single-pane replacements) and Puget Sound Energy (up to $100/window, more for income-qualified, through 2026).
- There is no federal HEAR rebate for windows (that program targets electrification equipment like heat pumps), so utility and state programs are the path — check the DSIRE database.
- The durable savings are on your energy bills: right-rated windows for your climate zone cut heating/cooling costs every year (see the climate-zone spec above).
Verified July 2026. Program budgets and windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database. Costadia does not administer these programs.
Rebates & tax credits
The federal 25C window tax credit (30%, up to $600) ended December 31, 2025 and no longer applies to 2026 installs. ENERGY STAR Most Efficient wood or fiberglass windows still pay back through lower energy bills, and many utilities and states offer their own rebates — check the DSIRE database.
Cheapest time for wood and fiberglass window replacement in Irving
Installers discount labor in the slow winter months, and manufacturers layer rebates on top during the same stretch — buying off-season means catching both at once instead of neither.
Why wood and fiberglass window replacement quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Trim, disposal and exterior flashing/caulking may be excluded.
- Full-frame replacement costs more than an insert (pocket) install — make sure bids match.
- Frame material — vinyl, wood, fiberglass — is a big driver.
Get an apples-to-apples bid
- Compare frame material on equal terms.
- Specify full-frame vs. insert for every bid.
- Check warranties on frame, glass seal and labor separately.
- Match the glass package and ENERGY STAR rating across quotes.
Questions to ask Irving Windows pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is this a full-frame replacement or an insert (pocket) install?
- 2What's the glass package — double vs. triple pane, low-E coating, gas fill?
- 3Are disposal, trim, and exterior caulking/flashing included?
- 4Are the windows ENERGY STAR rated for my climate zone?
- 5What's the warranty on the frame, glass seal, and the installation labor?
Wood & Fiberglass Window Replacement in Irving
How much does wood and fiberglass window replacement cost in Irving, TX?
Irving's going rate for wood and fiberglass window replacement is $10,050–$24,950 in 2026, with $17,500 the number most homeowners end up paying. That range already accounts for Irving's labor rates, its hot climate and local permit costs.
Is wood and fiberglass window replacement more expensive in Irving than average?
Labor is the biggest lever here: at an index of 0.97 versus the US average, Irving ends up about the same as the national average.; add in a Windows permit at roughly $125.
Do I need a permit for wood and fiberglass window replacement in Irving?
Yes — Irving typically requires a Windows permit for this job, running about $125. That cost is already folded into the estimate above.
What affects wood and fiberglass window replacement cost the most?
Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity. From there, a handful of specifics push the final number up or down. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (hot).
How much should new windows really cost you?
Frame material, glass package and install type decide the price. Our editors on what's worth paying for.
The value case
Vinyl, double-pane, low-E windows deliver most of the comfort and efficiency for the lowest price. For whole-home replacements on a budget, they're the sensible default.
The install case
A perfect window installed badly leaks and fails. Full-frame replacement with proper flashing beats a cheap pocket insert in a rotted opening — match the install method to your home's condition, not just the price.
The efficiency case
Where winters bite or summers punish, upgrading the glazing — triple-pane or a gas-filled low-E package — returns real money on heating and cooling bills, and ENERGY STAR-rated units can open the door to rebates. Put that upgrade money into the glass before you spend it on a fancier frame.
Buy the glass package your climate needs, default to vinyl frames unless you have a reason not to, and never let install quality be the thing you cut to hit a number.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national wood and fiberglass window replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Irving using the BLS metro wage data labor index (×0.97 here), the IECC hot-climate factor (×1.02) and a typical local permit fee (≈$125). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Irving wood and fiberglass window replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Wood and fiberglass window replacement alternatives in Irving
Homeowners in Irving often pair this with
A wood and fiberglass window replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Irving
Browse local 2026 costs for every home project in Irving, TX.