HVAC · Irving, TX
How much does furnace replacement cost in Irving, TX? (2026)
In Irving, furnace replacement runs $3,750–$6,700, with most paying around $5,250 — about 3% below the national average. Replacing a residential furnace, including the unit and installation labor.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $5,250
- Typical cost
- $5,250
- Labor vs US
- +3%
- Climate
- Hot
- Local permit
- $225
Refine your estimate
Tune it to your home to narrow the furnace replacement range.
Key takeaways for Irving
- Irving homeowners typically pay $3,750–$6,700 for furnace replacement, with $5,250 the usual landing spot — about 3% below the national average.
- Local labor in Irving is +3% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $225 for the local HVAC permit; it's already included above.
- Expect 15–30 years of service, so planning a replacement beats a full-price emergency call.
- Spring and fall (Mar–May, Sep–Oct) is the low-price window — about 5–15% under peak rates.
- Federal 25C/25D credits plus utility rebates sit below and can shave the final bill; the estimate here is pre-incentive.
What goes into the price in Irving
A typical Irving furnace replacement of $5,250 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Irving 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $1,400 – $2,600 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $2,125 – $3,875 |
| Permit & feesLocal building-department fee for HVAC work here. | $225 |
| Total installed cost | $3,750 – $6,700 |
Split from the Irving estimate using a 60% local-labor share; line items sum to the total.
Why furnace replacement costs what it does in Irving
- Labor in Irving runs about 3% above the national average (based on price levels for the Dallas-Fort Worth-Arlington metro area), which raises the installed price.
- Irving's hot climate reduces typical furnace replacement cost by about 5% versus a neutral climate.
- Budget about $225 for the local HVAC permit in Irving — already folded into the estimate above.
Furnace Replacement cost by home size in Irving
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| home size | Irving 2026 range |
|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,800 – $5,050 |
| 1,500 sq ft (≈68,000 BTU) | $3,250 – $5,750 |
| 2,000 sq ft (≈90,000 BTU) | $3,750 – $6,700 |
| 2,500 sq ft (≈110,000 BTU) | $4,300 – $7,600 |
| 3,000 sq ft (≈130,000 BTU) | $4,850 – $8,550 |
| 3,500+ sq ft (≈150,000 BTU) | $5,400 – $9,450 |
National size ranges localized to Irving labor and climate.
Furnace Replacement cost by type in Irving
| Gas furnace | $3,650 – $6,600 |
| High-efficiency gas furnace | $3,250 – $6,600 |
| Electric furnace | $2,050 – $4,350 |
Adjusted to Irving from national type-level ranges.
Furnace Replacement cost by efficiency in Irving
Efficiency is measured in AFUE — the percentage of fuel turned into heat. Higher AFUE costs more upfront but cuts fuel bills, and in cold (northern) regions the DOE requires ≥95% AFUE gas furnaces.
| 80% AFUE (standard)Lowest upfront; fine in mild climates | $3,000 – $5,300 |
| 90–95% AFUE (high-efficiency)Best all-round value in most regions | $3,750 – $6,700 |
| 96%+ AFUE (condensing, premium)Lowest fuel bills; required in cold zones | $4,850 – $9,000 |
Labor vs. materials in Irving
Install crew, removal, permit & startup — the part Irving rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $5,250 Irving project; your mix varies with scope.
Skilled installers in the Dallas-Fort Worth-Arlington area earn about $29.7/hr (5% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your furnace replacement cost.
How we estimate it
| National range | $3,800 – $7,000 |
| Irving labor adjustment | ×0.97 |
| hot climate factor | ×0.95 |
| Local permit | +$225 |
| Irving estimate | $3,750 – $6,700 |
Promo prices vs. the real cost
Before you're swayed by an ad, know that HVAC pricing has two layers — the marketing number and the actual installed cost. Here's what the marketing layer usually covers:
- Service call / diagnostic fee$75–$150
- "Free" replacement estimate$0 — it's a sales visit
- Seasonal tune-up promo$79–$129
- Financing offers$0 down · 0% APR, 12–60 mo
Additional furnace replacement costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Old furnace removal & disposal | $50 – $330 |
| New ductwork (vs. repair $300–$1,500)Only if ducts are missing or failing | $1,000 – $5,000 |
| Gas line run or upgrade | $250 – $800 |
| Chimney liner (for high-efficiency venting) | $600 – $2,500 |
| Smart thermostat | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- The furnace unit and burner assembly
- Installation labor and basic ductwork connections
- Thermostat connection and system startup/testing
- Removal and disposal of the old unit
What affects the cost
- Condition of existing ductwork and venting
- Heating capacity (BTU) needed for your square footage
- Whether a chimney liner or new gas line is required
- Fuel type (gas vs electric) and AFUE efficiency rating
Ways to save on furnace replacement in Irving
- Look for utility rebates on high-efficiency models
- Right-size the unit; oversizing wastes money and cycles hard
- Get at least 3 quotes — installed prices vary widely
- Schedule in the off-season (spring/summer) for better rates
How long does furnace replacement last in Irving?
Gas furnaces typically last 15–20 years; well-maintained units can reach 30.
An annual tune-up keeps efficiency up and protects the warranty.
Signs you need furnace replacement in Irving
- The furnace is 15+ years old (near or past its service life)
- Heating bills keep climbing despite no change in usage
- Some rooms are warm while others stay cold (uneven heating)
- Frequent repairs — you've called for service more than once or twice recently
- Banging, rattling or screeching noises on startup
- A yellow or flickering burner flame instead of steady blue (have it checked immediately)
- More dust, dryness, or a stale smell when the heat runs
Repair or replace in Irving?
Repair if…
- The unit is under ~10 years old and otherwise efficient
- The fix is a single inexpensive part (igniter, flame sensor, capacitor)
- It's still under manufacturer warranty
Replace if…
- It's 15+ years old and needs a major part
- The heat exchanger is cracked (a safety issue — replace, don't repair)
- The repair costs more than about half of a new system
- It's an 80% AFUE unit and your fuel bills are high in a cold climate
Rebates & incentives in Texas
Most 2026 rebates reward switching to a heat pump, not a like-for-like gas furnace. Replacing a gas furnace, your savings are mainly utility efficiency rebates (high-AFUE models) — but pricing out a heat pump often qualifies you for far larger rebates.
The federal 25C tax credit (up to $2,000 for heat pumps; $600 for high-efficiency AC or furnaces) and the 25D credit ended December 31, 2025 under the One Big Beautiful Bill Act — neither is available for 2026 installs. The remaining federal help is the IRA Home Electrification & Appliance Rebates (HEAR): up to $8,000 toward a heat pump for households under 150% of area median income, paid at point of sale where a state has launched its program.
Verified July 2026. Rebate budgets deplete and program windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database before you budget. Costadia does not administer these programs.
Cheapest time for furnace replacement in Irving
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
Why furnace replacement quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Brand, warranty length and whether startup/commissioning is included all move the number.
- Equipment tier isn't matched — a 14.3 SEER2 bid will always undercut an 18 SEER2 one for the "same" job.
- Sizing was guessed from square footage instead of a Manual J load calculation, so the equipment is wrong.
Get an apples-to-apples bid
- Require an itemized quote splitting equipment, labor, permit and add-ons.
- Insist on a Manual J load calculation, not a square-footage guess.
- Confirm old-unit removal, the permit and startup testing are all included.
- Ask every bidder for the same SEER2/AFUE rating so you compare like for like.
Questions to ask Irving HVAC pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Did you run a Manual J load calculation to size the system, or estimate from square footage?
- 2What AFUE/SEER2 rating is this unit, and what's the payback vs. the next tier up?
- 3Is removal of the old equipment, the permit, and startup testing included in the quote?
- 4Will my existing ductwork and venting work as-is, or is repair/resizing needed?
- 5What's covered under the labor warranty vs. the manufacturer's parts warranty?
Furnace Replacement in Irving
How much does furnace replacement cost in Irving, TX?
Expect to pay $3,750 to $6,700 for furnace replacement in Irving in 2026 — most quotes cluster around $5,250. Strip out Irving's labor rates, its hot climate and permit fees and you'd be left with a national average — this range keeps them in.
Is furnace replacement more expensive in Irving than average?
Because local labor indexes at 0.97 relative to the US average, Irving settles in about 3% lower than the national average., plus a local HVAC permit running about $225.
Do I need a permit for furnace replacement in Irving?
A HVAC permit is standard in Irving for this kind of work, at roughly $225. You won't need to add it on top of the estimate above — it's already there.
What affects furnace replacement cost the most?
Start with the fundamentals — replacing a residential furnace, including the unit and installation labor. What moves the price most: equipment or material grade, your home's size and complexity, local labor rates, and the hot climate zone.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national furnace replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Irving using the BLS metro wage data labor index (×0.97 here), the IECC hot-climate factor (×0.95) and a typical local permit fee (≈$225). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Irving furnace replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Furnace replacement alternatives in Irving
Often done together with furnace replacement in Irving
Bundling these shares labor and setup — and a single visit.
Homeowners in Irving often pair this with
A furnace replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Irving
Browse local 2026 costs for every home project in Irving, TX.