Roofing · Scranton, PA
How much does tile roof installation cost in Scranton, PA? (2026)
In Scranton, tile roof installation runs $10,250–$24,050, with most paying around $17,150 — about 3% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $17,150
- Typical cost
- $17,150
- Labor vs US
- −8%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Scranton
- Most Scranton homeowners land around $17,150 for tile roof installation, within a $10,250–$24,050 range that sits about 3% below the national average.
- This estimate departs from the national number mainly because Scranton labor sits −8% versus the US average.
- A Roofing permit in Scranton runs about $250 — it's already folded into the estimate above.
- Expect 50–100 years of service, so planning a replacement beats a full-price emergency call.
- Skip peak pricing by scheduling in Late spring to early fall (dry, 45–85°F); the shift is worth about 5–10%.
What goes into the price in Scranton
A typical Scranton tile roof installation of $17,150 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Scranton 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $4,000 – $9,500 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $6,000 – $14,300 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $250 |
| Total installed cost | $10,250 – $24,050 |
Split from the Scranton estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Scranton
- Scranton's labor rates sit about 8% lower than the national average (based on price levels for the Scranton--Wilkes-Barre metro area), pushing the price down.
- A Roofing permit in Scranton costs around $250, included above.
Tile Roof Installation cost by roof size in Scranton
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Scranton 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $6,900 – $13,600 |
| 1,500 sq ft (15 squares) | $8,800 – $18,350 |
| 2,000 sq ft (20 squares) | $10,250 – $24,050 |
| 2,500 sq ft (25 squares) | $12,650 – $28,800 |
| 3,000+ sq ft (30 squares) | $15,500 – $34,500 |
National size ranges localized to Scranton labor and climate.
Tile Roof Installation cost by type in Scranton
| Concrete tile | $10,250 – $20,200 |
| Clay / terracotta tile | $13,550 – $26,850 |
| Slate | $19,250 – $47,750 |
Adjusted to Scranton from national type-level ranges.
Tile Roof Installation cost by efficiency in Scranton
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,250 – $19,300 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $13,600 – $24,050 |
| Natural slatePremium stone; 75–100+ yr life | $19,300 – $43,100 |
Labor vs. materials in Scranton
Install crew, removal, permit & startup — the part Scranton rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $17,150 Scranton project; your mix varies with scope.
How we estimate it
| National range | $10,500 – $25,000 |
| Scranton labor adjustment | ×0.95 |
| cold climate factor | ×1 |
| Local permit | +$250 |
| Scranton estimate | $10,250 – $24,050 |
Promo prices vs. the real cost
The prices that fill your mailbox after a hailstorm are built to look cheap, not to describe the job — here's what those advertised figures usually assume:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Reinforced underlayment and battens
- Concrete or clay tiles
- Labor, cleanup and permit
- Tear-off and structural check
What affects the cost
- Pitch, complexity and hip/valley count
- Roof structure may need reinforcement for tile weight
- Concrete vs clay tile
- Specialty flashing and ridge work
Ways to save on tile roof installation in Scranton
- Tiles last 50+ years — strong lifetime value
- Reuse intact tiles where possible on repairs
- Confirm framing can carry the load before buying
- Concrete tile costs less than clay with similar life
How long does tile roof installation last in Scranton?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Scranton
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Scranton?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Scranton, PA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Scranton, PA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,650–$11,400 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,600–$15,200 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,100–$30,400 | $450/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,000–$38,000 | $450/yr |
Per-square ranges are national installed benchmarks localized to Scranton, PA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Scranton
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why tile roof installation quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Scranton Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Scranton
How much does tile roof installation cost in Scranton, PA?
tile roof installation in Scranton runs $10,250–$24,050 as of 2026, with $17,150 the figure most homeowners actually land on. The figure is adjusted for local labor rates, cold-climate factors and permit fees.
Is tile roof installation more expensive in Scranton than average?
Put Scranton next to the national picture and it lands about 3% lower than the national average; the labor index of 0.95 explains the bulk of it. (a local Roofing permit tacks on about $250).
Do I need a permit for tile roof installation in Scranton?
Do you need a permit? For this work in Scranton, yes — a Roofing permit at roughly $250, and the estimate above already carries it.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. From there, a handful of specifics push the final number up or down. Expect equipment/material grade, home size and complexity, local labor rates and the cold climate zone to matter most here.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Scranton using the BEA Regional Price Parity labor index (×0.95 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Scranton tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Scranton
Homeowners in Scranton often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Scranton
Browse local 2026 costs for every home project in Scranton, PA.