Roofing · Scranton, PA
How much does flat roof replacement cost in Scranton, PA? (2026)
In Scranton, flat roof replacement runs $5,150–$14,950, with most paying around $10,050 — in line with the national average. Replacing a flat or low-slope roof using membrane systems such as TPO, EPDM or modified bitumen.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $10,050
- Typical cost
- $10,050
- Labor vs US
- −8%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the flat roof replacement range.
Key takeaways for Scranton
- A flat roof replacement in Scranton typically runs $5,150–$14,950, with most homeowners paying about $10,050 — in line with the national average.
- Local labor in Scranton is −8% relative to the national average, which is what pushes this estimate away from the countrywide number.
- A Roofing permit in Scranton runs about $250 — it's already folded into the estimate above.
- Expect 15–30 years of service, so planning a replacement beats a full-price emergency call.
- Time it right and you can save 5–10%: the best window to book is Late spring to early fall (dry, 45–85°F).
What goes into the price in Scranton
A typical Scranton flat roof replacement of $10,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Scranton 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $1,950 – $5,900 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $2,950 – $8,800 |
| Permit & feesThe Roofing permit fee for this metro, based on local rates. | $250 |
| Total installed cost | $5,150 – $14,950 |
Split from the Scranton estimate using a 60% local-labor share; line items sum to the total.
Why flat roof replacement costs what it does in Scranton
- Scranton's labor rates sit about 8% lower than the national average (based on price levels for the Scranton--Wilkes-Barre metro area), pushing the price down.
- Because Scranton sits in a cold climate zone, flat roof replacement costs run about 3% higher than a neutral-climate baseline.
- A Roofing permit in Scranton costs around $250, included above.
Flat Roof Replacement cost by roof size in Scranton
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| roof size | Scranton 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $4,150 – $8,600 |
| 1,500 sq ft (15 squares) | $5,150 – $11,050 |
| 2,000 sq ft (20 squares) | $6,150 – $14,000 |
| 2,500 sq ft (25 squares) | $7,600 – $15,950 |
| 3,000+ sq ft (30 squares) | $9,100 – $18,900 |
National size ranges localized to Scranton labor and climate.
Flat Roof Replacement cost by type in Scranton
| EPDM (rubber) | $5,150 – $12,000 |
| TPO | $6,100 – $12,950 |
| PVC | $7,100 – $14,950 |
| Modified bitumen | $5,150 – $11,000 |
| Built-up roofing (BUR) | $6,600 – $13,950 |
Adjusted to Scranton from national type-level ranges.
Flat Roof Replacement cost by efficiency in Scranton
Flat roofs are defined by their membrane. EPDM (rubber) is the budget standard; TPO is the popular reflective 'cool roof' choice; PVC and modified bitumen suit grease or high-traffic settings.
| EPDM rubber membraneLowest-cost; durable black rubber; ~20–25 yr | $5,150 – $11,050 |
| TPO (reflective single-ply)Energy-saving white 'cool roof'; the mainstream pick | $6,150 – $13,000 |
| PVC / modified bitumenBest for chemical/grease exposure or layered systems | $7,100 – $14,950 |
Labor vs. materials in Scranton
Install crew, removal, permit & startup — the part Scranton rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $10,050 Scranton project; your mix varies with scope.
How we estimate it
| National range | $5,000 – $15,000 |
| Scranton labor adjustment | ×0.95 |
| cold climate factor | ×1.03 |
| Local permit | +$250 |
| Scranton estimate | $5,150 – $14,950 |
Promo prices vs. the real cost
The prices that fill your mailbox after a hailstorm are built to look cheap, not to describe the job — here's what those advertised figures usually assume:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional flat roof replacement costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Tear-off & disposal of old membrane | $1,000 – $3,000 |
| Decking / substrate repairFlat roofs trap water, so rot is common | $500 – $3,000 |
| New rigid insulation board (R-value) | $1,000 – $4,000 |
| Drains, scuppers & tapered slope correctionTo stop standing water (ponding) | $500 – $3,000 |
| Flashing & parapet wall detailing | $400 – $2,000 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Membrane material (TPO, EPDM or modified bitumen)
- Tear-off of the old membrane
- Flashing, drains, labor and permit
- Insulation board and fasteners/adhesive
What affects the cost
- Parapet and edge-metal detailing
- Insulation R-value added
- Roof area and number of penetrations/drains
- Membrane type and thickness (mil)
Ways to save on flat roof replacement in Scranton
- TPO offers a good cost-to-performance balance
- Address ponding/drainage to extend membrane life
- Mechanically-fastened systems install faster
- Add insulation now to cut energy bills
How long does flat roof replacement last in Scranton?
EPDM and TPO last ~20–25 years; PVC up to 30. Standing water shortens any flat-roof membrane.
Twice-yearly inspections to clear drains, reseal seams, and catch ponding before it causes leaks.
Signs you need flat roof replacement in Scranton
- Standing water (ponding) that lingers more than 48 hours after rain
- Blisters, bubbles, or splits in the membrane
- Seams or flashing lifting, cracking, or pulling apart
- Interior water stains, drips, or a sagging deck
- The membrane is brittle, cracked, or shrinking with age
- Repeated patch repairs that no longer hold
Repair or replace in Scranton?
Repair if…
- Leaks trace to isolated seams, flashing, or a single puncture
- The membrane is under ~15 years old and otherwise sound
- A reflective recoat can extend the existing membrane's life
Replace if…
- The membrane is brittle, blistered, or splitting across the roof
- Chronic ponding has saturated the insulation or decking
- The roof is past 20 years and leaking in multiple spots
Cost calculator
Roof cost by material in Scranton, PA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Scranton, PA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,650–$11,400 | $350/yr |
Flat / low-slope (TPO, EPDM)This page For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,600–$15,200 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,100–$30,400 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,000–$38,000 | $450/yr |
Per-square ranges are national installed benchmarks localized to Scranton, PA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for flat roof replacement in Scranton
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Why flat roof replacement quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Scranton Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Flat Roof Replacement in Scranton
How much does flat roof replacement cost in Scranton, PA?
The low end sits near $5,150 and the high end near $14,950 for flat roof replacement in Scranton this 2026, with $10,050 the common middle. Why that specific number? It reflects Scranton labor rates, cold-climate demands and permit fees rather than a flat national figure.
Is flat roof replacement more expensive in Scranton than average?
Labor is the biggest lever here: at an index of 0.95 versus the US average, Scranton ends up about the same as the national average., plus a local Roofing permit running about $250.
Do I need a permit for flat roof replacement in Scranton?
Expect to pull a Roofing permit in Scranton — about $250 — which is already built into the estimate above, not an extra charge.
What affects flat roof replacement cost the most?
Replacing a flat or low-slope roof using membrane systems such as TPO, EPDM or modified bitumen. What should you watch? Equipment or material grade, the home's size and complexity, local labor rates, and your cold climate zone — in roughly that order.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national flat roof replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Scranton using the BEA Regional Price Parity labor index (×0.95 here), the IECC cold-climate factor (×1.03) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Scranton flat roof replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Flat roof replacement alternatives in Scranton
Homeowners in Scranton often pair this with
A flat roof replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Scranton
Browse local 2026 costs for every home project in Scranton, PA.