Roofing · Scranton, PA
How much does metal roof installation cost in Scranton, PA? (2026)
In Scranton, metal roof installation runs $13,100–$29,950, with most paying around $21,550 — in line with the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,550
- Typical cost
- $21,550
- Labor vs US
- −8%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Scranton
- Priced in line with the national average, metal roof installation in Scranton spans $13,100 to $29,950 — figure $21,550 for a standard job.
- Running −8% against the US average, Scranton labor is what moves this price off the national figure.
- A Roofing permit in Scranton runs about $250 — it's already folded into the estimate above.
- Expect 40–70 years of service, so planning a replacement beats a full-price emergency call.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in Scranton
A typical Scranton metal roof installation of $21,550 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Scranton 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $5,150 – $11,900 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $7,700 – $17,800 |
| Permit & feesThe Roofing permit fee for this metro, based on local rates. | $250 |
| Total installed cost | $13,100 – $29,950 |
Split from the Scranton estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Scranton
- Expect labor here to run 8% below the national norm (based on price levels for the Scranton--Wilkes-Barre metro area) — that's what lowers the total.
- Scranton's cold climate increases typical metal roof installation cost by about 4% versus a neutral climate.
- Scranton's Roofing permit runs roughly $250, which is already part of the number above.
Metal Roof Installation cost by roof size in Scranton
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Scranton 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,150 – $16,100 |
| 1,500 sq ft (15 squares) | $11,150 – $23,000 |
| 2,000 sq ft (20 squares) | $13,100 – $29,950 |
| 2,500 sq ft (25 squares) | $16,100 – $35,900 |
| 3,000+ sq ft (30 squares) | $19,050 – $41,850 |
National size ranges localized to Scranton labor and climate.
Metal Roof Installation cost by type in Scranton
| Corrugated steel (exposed fastener) | $9,150 – $18,050 |
| Standing-seam steel | $18,050 – $34,850 |
| Aluminum | $14,100 – $27,900 |
| Copper | $29,900 – $59,550 |
| Zinc | $27,900 – $54,600 |
Adjusted to Scranton from national type-level ranges.
Metal Roof Installation cost by efficiency in Scranton
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,150 – $18,050 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,100 – $29,950 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $25,000 – $49,750 |
Labor vs. materials in Scranton
Install crew, removal, permit & startup — the part Scranton rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,550 Scranton project; your mix varies with scope.
How we estimate it
| National range | $13,000 – $30,000 |
| Scranton labor adjustment | ×0.95 |
| cold climate factor | ×1.04 |
| Local permit | +$250 |
| Scranton estimate | $13,100 – $29,950 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
None of these are a given. What you actually pay hinges on the condition of the current system and how hard the site is to work in.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
- Tear-off of the old roof
What affects the cost
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
- Metal: steel, aluminum, copper or zinc
- Roof complexity and number of penetrations
Ways to save on metal roof installation in Scranton
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Scranton?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Scranton
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Scranton?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Scranton, PA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Scranton, PA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,650–$11,400 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,600–$15,200 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,100–$30,400 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,000–$38,000 | $450/yr |
Per-square ranges are national installed benchmarks localized to Scranton, PA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Scranton
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why metal roof installation quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Scranton Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Scranton
How much does metal roof installation cost in Scranton, PA?
Most Scranton homeowners pay around $21,550 for metal roof installation, though 2026 quotes stretch from $13,100 to $29,950. The figure is adjusted for local labor rates, cold-climate factors and permit fees.
Is metal roof installation more expensive in Scranton than average?
Labor is the biggest lever here: at an index of 0.95 versus the US average, Scranton ends up about the same as the national average. and the local Roofing permit costs about $250.
Do I need a permit for metal roof installation in Scranton?
The estimate above already covers the Roofing permit Scranton generally requires for this job, so the $250 or so it costs won't land as a surprise.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Where two homes diverge is in the details below. Grade of equipment and materials tops the list, followed by home size and complexity, local labor, and the cold climate zone.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Scranton using the BEA Regional Price Parity labor index (×0.95 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Scranton metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Scranton
Homeowners in Scranton often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Scranton
Browse local 2026 costs for every home project in Scranton, PA.