Roofing · Moore, OK
How much does metal roof installation cost in Moore, OK? (2026)
In Moore, metal roof installation runs $12,700–$28,950, with most paying around $20,850 — about 3% below the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,850
- Typical cost
- $20,850
- Labor vs US
- −9%
- Climate
- Mixed
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Moore
- In Moore, metal roof installation runs $12,700–$28,950 — call it $20,850 for a typical job, about 3% below the national average.
- Moore labor runs −9% versus the US average — the main reason the local price differs from the national figure.
- The estimate already covers the Roofing permit — roughly $250 in Moore.
- Count on 40–70 years from a solid install; timing the next job yourself avoids the emergency premium.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in Moore
A typical Moore metal roof installation of $20,850 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Moore 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $5,000 – $11,500 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $7,450 – $17,200 |
| Permit & feesLocal building-department fee for Roofing work here. | $250 |
| Total installed cost | $12,700 – $28,950 |
Split from the Moore estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Moore
- Moore's labor rates sit about 9% lower than the national average (based on price levels for the Oklahoma City metro area), pushing the price down.
- Moore's Roofing permit runs roughly $250, which is already part of the number above.
Metal Roof Installation cost by roof size in Moore
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Moore 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $7,900 – $15,550 |
| 1,500 sq ft (15 squares) | $10,750 – $22,250 |
| 2,000 sq ft (20 squares) | $12,700 – $28,950 |
| 2,500 sq ft (25 squares) | $15,550 – $34,650 |
| 3,000+ sq ft (30 squares) | $18,400 – $40,400 |
National size ranges localized to Moore labor and climate.
Metal Roof Installation cost by type in Moore
| Corrugated steel (exposed fastener) | $8,900 – $17,550 |
| Standing-seam steel | $17,550 – $33,850 |
| Aluminum | $13,700 – $27,150 |
| Copper | $29,050 – $57,850 |
| Zinc | $27,150 – $53,050 |
Adjusted to Moore from national type-level ranges.
Metal Roof Installation cost by efficiency in Moore
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $7,900 – $17,450 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $12,700 – $28,950 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,150 – $48,050 |
Labor vs. materials in Moore
Install crew, removal, permit & startup — the part Moore rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,850 Moore project; your mix varies with scope.
Skilled installers in the Oklahoma City area earn about $28.9/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Moore labor adjustment | ×0.96 |
| mixed climate factor | ×1 |
| Local permit | +$250 |
| Moore estimate | $12,700 – $28,950 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
- Tear-off of the old roof
- Labor, cleanup and permit
What affects the cost
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
Ways to save on metal roof installation in Moore
- Steel standing seam balances cost and longevity
- Some insurers discount metal and impact-rated roofs
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Moore?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Moore
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Moore?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Moore, OK
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Moore, OK labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Moore, OK labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Moore
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why metal roof installation quotes vary — and how to compare them fairly
Big gaps between bids come down to scope far more often than greed. This breaks down the levers and how to force a like-for-like comparison.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
- Verify the contractor is licensed, insured and local, with recent references.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Moore Roofing pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Moore
How much does metal roof installation cost in Moore, OK?
Expect to pay $12,700 to $28,950 for metal roof installation in Moore in 2026 — most quotes cluster around $20,850. Why that specific number? It reflects Moore labor rates, mixed-climate demands and permit fees rather than a flat national figure.
Is metal roof installation more expensive in Moore than average?
Why the gap? Moore prices about 3% lower than the national average, and local labor — indexed at 0.96 against the US average — does most of the work., with the local Roofing permit adding roughly $250.
Do I need a permit for metal roof installation in Moore?
Do you need a permit? For this work in Moore, yes — a Roofing permit at roughly $250, and the estimate above already carries it.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Your mixed climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Moore using the BLS metro wage data labor index (×0.96 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Moore metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Moore
Homeowners in Moore often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Moore
Browse local 2026 costs for every home project in Moore, OK.