Metal Roof Installation cost: Moore vs Oklahoma City (2026)
Metal roof installation costs about the same in Moore and Oklahoma City in 2026 — roughly $20,850 in each.
Moore OK
Typically around $20,850
Oklahoma City OK
Typically around $20,850
Moore vs Oklahoma City: full breakdown
| Factor | Moore | Oklahoma City |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$28,950 | $12,700–$28,950 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Moore vs Oklahoma City
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Moore | Oklahoma City |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,850–$17,450 | $8,850–$17,450 |
| Standing-seam steel | $17,450–$33,700 | $17,450–$33,700 |
| Aluminum | $13,650–$27,000 | $13,650–$27,000 |
| Copper | $28,950–$57,600 | $28,950–$57,600 |
| Zinc | $27,000–$52,850 | $27,000–$52,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Moore vs Oklahoma City
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Moore | Oklahoma City |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $10,750–$22,250 | $10,750–$22,250 |
| 2,000 sq ft (20 squares) | $12,700–$28,950 | $12,700–$28,950 |
| 2,500 sq ft (25 squares) | $15,550–$34,650 | $15,550–$34,650 |
| 3,000+ sq ft (30 squares) | $18,400–$40,400 | $18,400–$40,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Oklahoma City metro · about 7% below the US average installer wage.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Moore vs Oklahoma City
Is metal roof installation cheaper in Moore or Oklahoma City?
Not really — both cities land at almost the same number for metal roof installation, around $20,850 each.
Why does metal roof installation cost more in Oklahoma City than Moore?
Labor rates explain most of it — 0.96 in Oklahoma City vs 0.96 in Moore. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Moore, OK?
In Moore, metal roof installation typically runs $12,700–$28,950 in 2026, with most homeowners paying around $20,850.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $28.9/hr in Oklahoma City compared with $28.9/hr in Oklahoma City (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Moore and Oklahoma City: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Moore and Oklahoma City. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik