Roofing · Moore, OK
How much does tile roof installation cost in Moore, OK? (2026)
In Moore, tile roof installation runs $10,300–$24,150, with most paying around $17,250 — about 3% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $17,250
- Typical cost
- $17,250
- Labor vs US
- −9%
- Climate
- Mixed
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Moore
- Moore homeowners typically pay $10,300–$24,150 for tile roof installation, with $17,250 the usual landing spot — about 3% below the national average.
- The −9% gap between Moore and national labor rates is the single biggest reason this price isn't the national average.
- Budget about $250 for the local Roofing permit; it's already included above.
- Expect 50–100 years of service, so planning a replacement beats a full-price emergency call.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Moore
A typical Moore tile roof installation of $17,250 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Moore 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $4,000 – $9,550 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $6,050 – $14,350 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $250 |
| Total installed cost | $10,300 – $24,150 |
Split from the Moore estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Moore
- Moore's labor rates sit about 9% lower than the national average (based on price levels for the Oklahoma City metro area), pushing the price down.
- Budget about $250 for the local Roofing permit in Moore — already folded into the estimate above.
Tile Roof Installation cost by roof size in Moore
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Moore 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $6,950 – $13,650 |
| 1,500 sq ft (15 squares) | $8,850 – $18,400 |
| 2,000 sq ft (20 squares) | $10,300 – $24,150 |
| 2,500 sq ft (25 squares) | $12,700 – $28,950 |
| 3,000+ sq ft (30 squares) | $15,550 – $34,650 |
National size ranges localized to Moore labor and climate.
Tile Roof Installation cost by type in Moore
| Concrete tile | $10,350 – $20,400 |
| Clay / terracotta tile | $13,700 – $27,150 |
| Slate | $19,450 – $48,250 |
Adjusted to Moore from national type-level ranges.
Tile Roof Installation cost by efficiency in Moore
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,300 – $19,350 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $13,650 – $24,150 |
| Natural slatePremium stone; 75–100+ yr life | $19,350 – $43,300 |
Labor vs. materials in Moore
Install crew, removal, permit & startup — the part Moore rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $17,250 Moore project; your mix varies with scope.
Skilled installers in the Oklahoma City area earn about $28.9/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.
How we estimate it
| National range | $10,500 – $25,000 |
| Moore labor adjustment | ×0.96 |
| mixed climate factor | ×1 |
| Local permit | +$250 |
| Moore estimate | $10,300 – $24,150 |
Promo prices vs. the real cost
The prices that fill your mailbox after a hailstorm are built to look cheap, not to describe the job — here's what those advertised figures usually assume:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Reinforced underlayment and battens
- Labor, cleanup and permit
- Tear-off and structural check
- Concrete or clay tiles
What affects the cost
- Roof structure may need reinforcement for tile weight
- Pitch, complexity and hip/valley count
- Concrete vs clay tile
- Specialty flashing and ridge work
Ways to save on tile roof installation in Moore
- Confirm framing can carry the load before buying
- Reuse intact tiles where possible on repairs
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
How long does tile roof installation last in Moore?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Moore
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Moore?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Moore, OK
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Moore, OK labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Moore, OK labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Moore
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Why tile roof installation quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Verify the contractor is licensed, insured and local, with recent references.
- Specify tear-off vs. overlay so all bids match.
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Moore Roofing pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Moore
How much does tile roof installation cost in Moore, OK?
Expect to pay $10,300 to $24,150 for tile roof installation in Moore in 2026 — most quotes cluster around $17,250. Strip out Moore's labor rates, its mixed climate and permit fees and you'd be left with a national average — this range keeps them in.
Is tile roof installation more expensive in Moore than average?
Yes — Moore is about 3% lower than the national average, largely a function of local labor pricing at 0.96× the US average. — the local Roofing permit, about $250, is part of that too.
Do I need a permit for tile roof installation in Moore?
Expect to pull a Roofing permit in Moore — about $250 — which is already built into the estimate above, not an extra charge.
What affects tile roof installation cost the most?
In plain terms, installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. What should you watch? Equipment or material grade, the home's size and complexity, local labor rates, and your mixed climate zone — in roughly that order.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Moore using the BLS metro wage data labor index (×0.96 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Moore tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Moore
Homeowners in Moore often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Moore
Browse local 2026 costs for every home project in Moore, OK.