Plumbing · Hollywood, CA
How much does whole-house repipe cost in Hollywood, CA? (2026)
In Hollywood, whole-house repipe runs $4,000–$9,000, with most paying around $6,500 — about 14% above the national average. Replacing a home's water supply piping — typically swapping old galvanized or failing pipe for PEX or copper.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $6,500
- Typical cost
- $6,500
- Labor vs US
- +13%
- Climate
- Mixed
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the whole-house repipe range.
Key takeaways for Hollywood
- In Hollywood, whole-house repipe runs $4,000–$9,000 — call it $6,500 for a typical job, about 14% above the national average.
- Local labor in Hollywood is +13% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $275 for the local Plumbing permit; it's already included above.
- Expect 50–100 years of service, so planning a replacement beats a full-price emergency call.
- Time it right and you can save Around 5%: the best window to book is Off-peak winter for planned work.
What goes into the price in Hollywood
A typical Hollywood whole-house repipe of $6,500 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Hollywood 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $1,500 – $3,500 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $2,225 – $5,225 |
| Permit & feesLocal building-department fee for Plumbing work here. | $275 |
| Total installed cost | $4,000 – $9,000 |
Split from the Hollywood estimate using a 60% local-labor share; line items sum to the total.
Why whole-house repipe costs what it does in Hollywood
- Labor in Hollywood runs about 13% above the national average (based on price levels for the Los Angeles-Long Beach-Anaheim metro area), which raises the installed price.
- Budget about $275 for the local Plumbing permit in Hollywood — already folded into the estimate above.
Whole House Repipe cost by home size in Hollywood
Repipe cost scales with how many bathrooms and fixtures the crew has to reach — more baths means more runs, more wall and ceiling access, and more labor. Pricing below assumes standard single-story access.
| home size | Hollywood 2026 range |
|---|---|
| 1 bath / ~1,000 sq ft | $3,550 – $6,300 |
| 2 bath / ~1,500 sq ft | $4,400 – $7,900 |
| 3 bath / ~2,000 sq ft | $5,500 – $10,100 |
| 4+ bath / 2,500+ sq ft | $6,800 – $13,350 |
National size ranges localized to Hollywood labor and climate.
Whole House Repipe cost by type in Hollywood
| PEX | $4,000 – $7,900 |
| CPVC | $4,650 – $9,000 |
| Copper | $6,800 – $16,650 |
Adjusted to Hollywood from national type-level ranges.
Whole House Repipe cost by efficiency in Hollywood
The pipe material drives both price and longevity. PEX is flexible, fast to run, and the cheapest to install; rigid copper costs more in material and labor but is the long-haul standard many buyers prefer.
| PEX (cross-linked polyethylene)Cheapest to install; flexible, freeze-tolerant | $3,550 – $6,800 |
| CPVCMid-cost rigid plastic; common in hot-water lines | $4,100 – $7,900 |
| Copper (rigid)Highest cost; long lifespan, resale appeal | $5,750 – $13,350 |
Labor vs. materials in Hollywood
Install crew, removal, permit & startup — the part Hollywood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $6,500 Hollywood project; your mix varies with scope.
Skilled installers in the Los Angeles-Long Beach-Anaheim area earn about $35.9/hr (15% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your whole-house repipe cost.
How we estimate it
| National range | $3,400 – $8,000 |
| Hollywood labor adjustment | ×1.09 |
| mixed climate factor | ×1 |
| Local permit | +$275 |
| Hollywood estimate | $4,000 – $9,000 |
Promo prices vs. the real cost
Service-call pricing is separate from the project cost:
- Service / diagnostic call$75–$200
- "Free" estimate on big jobs$0 — it's a sales visit
- Camera inspection$100–$350 (sometimes waived)
Additional whole-house repipe costs to budget for
These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.
| Drywall & wall/ceiling patch + repaintCrews open walls to reach pipes; finishing is often separate | $500 – $3,000 |
| Permit & inspection | $100 – $500 |
| Move out / hotel during workWhole-house repipes can take 2–5 days with water off | $0 – $1,000 |
| Replace shutoff valves & supply lines | $150 – $600 |
| Slab access / concrete cut (slab homes)Only if lines run under a concrete slab | $1,000 – $4,000 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- New PEX or copper supply lines
- Fixture reconnections
- Basic drywall patching and permit
- Removal of accessible old piping
What affects the cost
- Slab vs crawlspace/basement access
- Home size and number of bathrooms
- Wall opening and patching needed
- PEX vs copper
Ways to save on whole-house repipe in Hollywood
- PEX costs less than copper and installs faster
- Act before a leak causes water damage
- Get multiple licensed-plumber bids
- Repipe during a remodel to share wall access
How long does whole-house repipe last in Hollywood?
PEX and CPVC last ~40–50+ years; copper commonly reaches 50–70+ years. A repipe is essentially a once-in-a-lifetime job.
Repiped supply lines need almost no upkeep; budget only for the occasional shutoff-valve or fixture check.
Signs you need whole-house repipe in Hollywood
- Chronic low water pressure throughout the house
- Rusty, brown, or metallic-tasting water (corroding pipes)
- Frequent or repeated pinhole leaks and pipe repairs
- Old galvanized steel, polybutylene, or lead supply pipes
- Banging, knocking, or whistling pipes (water hammer / corrosion)
- Visible corrosion, flaking, or green stains on exposed pipe
- The home is 50+ years old on its original plumbing
Repair or replace in Hollywood?
Repair if…
- A single, accessible leak in otherwise sound modern pipe (PEX/copper)
- The rest of the system is under ~25 years old and leak-free
- The damaged section is short and easy to isolate
Replace if…
- Pipes are galvanized steel, polybutylene, or lead
- Leaks keep recurring in different spots (systemic corrosion)
- Water pressure and water quality are both declining
- You're already gutting walls for a remodel (do it once)
Cheapest time for whole-house repipe in Hollywood
There's no such thing as a discount on a true emergency. The savings come from treating a repipe or sewer replacement as a planned project instead, scheduled for a quieter stretch when crews aren't stretched thin.
Why whole-house repipe quotes vary — and how to compare them fairly
Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.
Why a quote looks high (or low)
- Trenchless vs. traditional dig is a major price difference.
- Permits, inspection and surface/landscape restoration may be excluded.
- Scope is often unknown until a camera inspection confirms it.
Get an apples-to-apples bid
- Confirm permits, inspection and restoration are included.
- Require a camera inspection so the scope is confirmed before work.
- Clarify who owns the city-side portion of the line.
- Compare pipe material on equal terms.
Questions to ask Hollywood Plumbing pros
Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.
- 1Trenchless vs. traditional dig — which fits my situation and why?
- 2Is a camera inspection included so we confirm the scope before digging?
- 3Are permits, inspection, and surface/landscape restoration included?
- 4What pipe material are you using (PEX vs. copper) and why?
- 5Who is responsible for the city-owned portion of the line?
Whole House Repipe in Hollywood
How much does whole-house repipe cost in Hollywood, CA?
Expect to pay $4,000 to $9,000 for whole-house repipe in Hollywood in 2026 — most quotes cluster around $6,500. That's not a national average — it's adjusted for Hollywood labor rates, mixed-climate factors and permit fees.
Is whole-house repipe more expensive in Hollywood than average?
Hollywood comes in about 14% higher than the national average. The main reason is labor: it indexes at 1.09 relative to the national average.; add in a Plumbing permit at roughly $275.
Do I need a permit for whole-house repipe in Hollywood?
Most Hollywood jurisdictions require a Plumbing permit for this work. Budget roughly $275 for the permit; it is already included in the estimate above.
What affects whole-house repipe cost the most?
Replacing a home's water supply piping — typically swapping old galvanized or failing pipe for PEX or copper. That's the baseline — the price moves from there. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (mixed).
How do you budget a major plumbing job?
Repipes and sewer lines are scope-driven — the method and what's underground decide the price. Our editors on the trade-offs.
The method case
Trenchless repair costs more per foot but saves your driveway, landscaping and the restoration bill. Traditional dig is cheaper upfront only if there's little to tear up and rebuild.
The diagnosis-first case
Never budget a sewer or repipe job from a guess. A camera inspection confirms the real scope and stops you paying for work you don't need — or being blindsided by work you do.
The material case
PEX is cheaper, faster and freeze-tolerant; copper costs more but lasts longer and some buyers prefer it. Match the material to your climate and how long you'll own the home.
Scope, not brand, is what sets a plumbing price. Confirm it with a camera inspection, compare trenchless against the full cost of a dig — landscaping included — and match pipe material to your climate.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national whole-house repipe ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Hollywood using the BLS metro wage data labor index (×1.09 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Hollywood whole-house repipe estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Homeowners in Hollywood often pair this with
A whole-house repipe rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Hollywood
Browse local 2026 costs for every home project in Hollywood, CA.