Metal Roof Installation cost: Murray vs Salt Lake City (2026)
Murray and Salt Lake City are a near-perfect match on metal roof installation cost in 2026, both landing around $22,250.
Murray UT
Typically around $22,250
Salt Lake City UT
Typically around $22,250
Murray vs Salt Lake City: full breakdown
| Factor | Murray | Salt Lake City |
|---|---|---|
| Typical 2026 cost | $22,250 | $22,250 |
| Estimated range | $13,550–$30,900 | $13,550–$30,900 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $275 |
| Labor share | $13,350 | $13,350 |
| Materials/equipment | $8,900 | $8,900 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Murray vs Salt Lake City
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Murray | Salt Lake City |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,450–$18,650 | $9,450–$18,650 |
| Standing-seam steel | $18,650–$36,000 | $18,650–$36,000 |
| Aluminum | $14,550–$28,850 | $14,550–$28,850 |
| Copper | $30,900–$61,500 | $30,900–$61,500 |
| Zinc | $28,850–$56,400 | $28,850–$56,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Murray vs Salt Lake City
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Murray | Salt Lake City |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,450–$16,600 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $11,500–$23,750 | $11,500–$23,750 |
| 2,000 sq ft (20 squares) | $13,550–$30,900 | $13,550–$30,900 |
| 2,500 sq ft (25 squares) | $16,600–$37,000 | $16,600–$37,000 |
| 3,000+ sq ft (30 squares) | $19,650–$43,100 | $19,650–$43,100 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Murray vs Salt Lake City
Is metal roof installation cheaper in Murray or Salt Lake City?
Not really — both cities land at almost the same number for metal roof installation, around $22,250 each.
Why does metal roof installation cost more in Salt Lake City than Murray?
It comes down to labor: Salt Lake City indexes at 0.98 against Murray's 0.98. The cold-vs-cold climate difference adds to the gap.
How much is metal roof installation in Murray, UT?
metal roof installation in Murray runs $13,550–$30,900 as of 2026 — most jobs land near $22,250.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $30.1/hr around Salt Lake City-Murray versus $30.1/hr near Salt Lake City-Murray. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Murray and Salt Lake City, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Murray and Salt Lake City — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik