Metal Roof Installation cost: Murray vs Orem (2026)
Murray runs 1% higher than Orem for metal roof installation — expect around $22,250 in Murray against $22,000 in Orem, a difference of about $250.
Murray UT
Typically around $22,250
Orem UT
Lower costTypically around $22,000
Murray vs Orem: full breakdown
| Factor | Murray | Orem |
|---|---|---|
| Typical 2026 cost | $22,250 | $22,000 |
| Estimated range | $13,550–$30,900 | $13,400–$30,550 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $275 |
| Labor share | $13,350 | $13,200 |
| Materials/equipment | $8,900 | $8,800 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the price difference a dealbreaker?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Murray vs Orem
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Murray | Orem |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,450–$18,650 | $9,350–$18,450 |
| Standing-seam steel | $18,650–$36,000 | $18,450–$35,600 |
| Aluminum | $14,550–$28,850 | $14,400–$28,500 |
| Copper | $30,900–$61,500 | $30,550–$60,800 |
| Zinc | $28,850–$56,400 | $28,500–$55,750 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Murray vs Orem
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Murray | Orem |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,450–$16,600 | $8,350–$16,400 |
| 1,500 sq ft (15 squares) | $11,500–$23,750 | $11,350–$23,500 |
| 2,000 sq ft (20 squares) | $13,550–$30,900 | $13,400–$30,550 |
| 2,500 sq ft (25 squares) | $16,600–$37,000 | $16,400–$36,600 |
| 3,000+ sq ft (30 squares) | $19,650–$43,100 | $19,450–$42,650 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Orem; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Murray vs Orem
Is metal roof installation cheaper in Murray or Orem?
Orem comes out ahead here, at roughly $22,000 for metal roof installation compared with $22,250 in Murray — a 1% ($250) gap as of 2026.
Why does metal roof installation cost more in Murray than Orem?
Labor rates explain most of it — 0.98 in Murray vs 0.97 in Orem. A cold climate versus cold accounts for the rest.
How much is metal roof installation in Murray, UT?
metal roof installation in Murray runs $13,550–$30,900 as of 2026 — most jobs land near $22,250.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Murray and Orem: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $250 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Murray can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik