Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Lawton vs Moore (2026)

The two metros aren't quite in sync on metal roof installation: Lawton sits 5% below Moore, or roughly $19,850 versus $20,850 — about $1,000 apart.

Lawton OK

Lower cost
$12,100 $27,550

Typically around $19,850

Moore OK

$12,700 $28,950

Typically around $20,850

Moore costs about $1,000 (5%) more than Lawton for metal roof installation, largely because of the local labor rate gap.
Side by side

Lawton vs Moore: full breakdown

FactorLawtonMoore
Typical 2026 cost$19,850$20,850
Estimated range$12,100–$27,550$12,700–$28,950
Labor index (vs US)×0.91×0.96
Climate zoneMixedMixed
Climate factor×1×1
Local permit$250$250
Labor share$11,900$12,500
Materials/equipment$7,950$8,350

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

Is the price difference a dealbreaker?

At 5%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.

By type

Metal roof installation by type: Lawton vs Moore

Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeLawtonMoore
Corrugated steel (exposed fastener)$8,450$16,650$8,850$17,450
Standing-seam steel$16,650$32,100$17,450$33,700
Aluminum$13,000$25,750$13,650$27,000
Copper$27,550$54,850$28,950$57,600
Zinc$25,750$50,300$27,000$52,850

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

By size

Metal roof installation by roof size: Lawton vs Moore

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeLawtonMoore
1,000 sq ft (10 squares)$7,550$14,800$7,900$15,550
1,500 sq ft (15 squares)$10,250$21,200$10,750$22,250
2,000 sq ft (20 squares)$12,100$27,550$12,700$28,950
2,500 sq ft (25 squares)$14,800$33,000$15,550$34,650
3,000+ sq ft (30 squares)$17,550$38,450$18,400$40,400

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

Lawton, OK
Modeled from state data

No BLS metro wage series for Lawton; we use Oklahoma regional price parity instead.

Moore, OK
$28.9/hr

Oklahoma City metro · about 7% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Lawton vs Moore

Is metal roof installation cheaper in Lawton or Moore?

Lawton wins on price: metal roof installation runs about $19,850 there versus $20,850 in Moore, a gap of roughly $1,000 (5%) as of 2026.

Why does metal roof installation cost more in Moore than Lawton?

The main driver is local labor rates: Moore's labor index is 0.96 versus 0.91 in Lawton. Climate zone (mixed vs mixed) also shift the total.

How much is metal roof installation in Lawton, OK?

Expect to pay $12,100 to $27,550 for metal roof installation in Lawton in 2026, averaging around $19,850.

When is the cheapest time to buy metal roof installation — and does it differ by city?

No, the seasonal pattern is the same in Lawton and Moore: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on metal roof installation cost?

Not really — the $1,000 gap is one-time, and smart timing and tighter quotes in Moore can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik