Metal Roof Installation cost: Maple Grove vs Rochester (2026)
Maple Grove runs 16% higher than Rochester for metal roof installation — expect around $25,050 in Maple Grove against $21,550 in Rochester, a difference of about $3,500.
Maple Grove MN
Typically around $25,050
Rochester MN
Lower costTypically around $21,550
Maple Grove vs Rochester: full breakdown
| Factor | Maple Grove | Rochester |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,550 |
| Estimated range | $15,250–$34,850 | $13,100–$29,950 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,950 |
| Materials/equipment | $10,000 | $8,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
A 16% spread (roughly $3,500) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Maple Grove typically recover some of it.
Metal roof installation by type: Maple Grove vs Rochester
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Maple Grove | Rochester |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,150–$18,050 |
| Standing-seam steel | $21,000–$40,600 | $18,050–$34,900 |
| Aluminum | $16,400–$32,550 | $14,100–$27,950 |
| Copper | $34,850–$69,350 | $29,950–$59,650 |
| Zinc | $32,550–$63,600 | $27,950–$54,700 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Maple Grove vs Rochester
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Maple Grove | Rochester |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,150–$16,100 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $13,100–$29,950 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $16,100–$35,900 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $19,050–$41,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Rochester; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Maple Grove vs Rochester
Is metal roof installation cheaper in Maple Grove or Rochester?
Yes — Maple Grove costs more. Expect around $25,050 for metal roof installation there against $21,550 in Rochester, about $3,500 (16%) apart in 2026.
Why does metal roof installation cost more in Maple Grove than Rochester?
The main driver is local labor rates: Maple Grove's labor index is 1.11 versus 0.95 in Rochester. Climate zone (cold vs cold) and permit fees also shift the total.
How much is metal roof installation in Maple Grove, MN?
Expect to pay $15,250 to $34,850 for metal roof installation in Maple Grove in 2026, averaging around $25,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Maple Grove and Rochester (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $3,500 difference is real but one-time, and you can often close most of it in Maple Grove by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik