Metal Roof Installation cost: Duluth vs Maple Grove (2026)
Duluth runs 18% lower than Maple Grove for metal roof installation — expect around $21,150 in Duluth against $25,050 in Maple Grove, a difference of about $3,900.
Duluth MN
Lower costTypically around $21,150
Maple Grove MN
Typically around $25,050
Duluth vs Maple Grove: full breakdown
| Factor | Duluth | Maple Grove |
|---|---|---|
| Typical 2026 cost | $21,150 | $25,050 |
| Estimated range | $12,900–$29,400 | $15,250–$34,850 |
| Labor index (vs US) | ×0.93 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $250 | $300 |
| Labor share | $12,700 | $15,050 |
| Materials/equipment | $8,450 | $10,000 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
A 18% spread (roughly $3,900) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Maple Grove typically recover some of it.
Metal roof installation by type: Duluth vs Maple Grove
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Duluth | Maple Grove |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,000–$17,750 | $10,650–$21,000 |
| Standing-seam steel | $17,750–$34,250 | $21,000–$40,600 |
| Aluminum | $13,850–$27,450 | $16,400–$32,550 |
| Copper | $29,400–$58,550 | $34,850–$69,350 |
| Zinc | $27,450–$53,650 | $32,550–$63,600 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Duluth vs Maple Grove
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Duluth | Maple Grove |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,800 | $9,500–$18,700 |
| 1,500 sq ft (15 squares) | $10,950–$22,600 | $12,950–$26,750 |
| 2,000 sq ft (20 squares) | $12,900–$29,400 | $15,250–$34,850 |
| 2,500 sq ft (25 squares) | $15,800–$35,200 | $18,700–$41,750 |
| 3,000+ sq ft (30 squares) | $18,700–$41,050 | $22,150–$48,650 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Duluth; we use Minnesota regional price parity instead.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Duluth vs Maple Grove
Is metal roof installation cheaper in Duluth or Maple Grove?
Duluth wins on price: metal roof installation runs about $21,150 there versus $25,050 in Maple Grove, a gap of roughly $3,900 (18%) as of 2026.
Why does metal roof installation cost more in Maple Grove than Duluth?
Maple Grove's higher labor index (1.11 vs 0.93 in Duluth) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Duluth, MN?
In Duluth, metal roof installation typically runs $12,900–$29,400 in 2026, with most homeowners paying around $21,150.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Duluth and Maple Grove: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Not really — the $3,900 gap is one-time, and smart timing and tighter quotes in Maple Grove can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik