Metal Roof Installation cost: Jacksonville vs The Hammocks (2026)
Jacksonville runs 1% lower than The Hammocks for metal roof installation — expect around $21,200 in Jacksonville against $21,500 in The Hammocks, a difference of about $300.
Jacksonville FL
Lower costTypically around $21,200
The Hammocks FL
Typically around $21,500
Jacksonville vs The Hammocks: full breakdown
| Factor | Jacksonville | The Hammocks |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,500 |
| Estimated range | $12,950–$29,450 | $13,100–$29,850 |
| Labor index (vs US) | ×0.94 | ×0.96 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $325 |
| Labor share | $12,700 | $12,900 |
| Materials/equipment | $8,500 | $8,600 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Jacksonville vs The Hammocks
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Jacksonville | The Hammocks |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,200–$18,050 |
| Standing-seam steel | $17,800–$34,350 | $18,050–$34,750 |
| Aluminum | $13,900–$27,500 | $14,100–$27,900 |
| Copper | $29,450–$58,650 | $29,850–$59,400 |
| Zinc | $27,500–$53,800 | $27,900–$54,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Jacksonville vs The Hammocks
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | The Hammocks |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,200–$16,050 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,150–$22,950 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,100–$29,850 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,050–$35,750 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,050–$41,650 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Jacksonville metro · about 9% below the US average installer wage.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Jacksonville vs The Hammocks
Is metal roof installation cheaper in Jacksonville or The Hammocks?
Yes — The Hammocks costs more. Expect around $21,500 for metal roof installation there against $21,200 in Jacksonville, about $300 (1%) apart in 2026.
Why does metal roof installation cost more in The Hammocks than Jacksonville?
The main driver is local labor rates: The Hammocks's labor index is 0.96 versus 0.94 in Jacksonville. Climate zone (hot vs hot) and permit fees also shift the total.
How much is metal roof installation in Jacksonville, FL?
In Jacksonville, metal roof installation typically runs $12,950–$29,450 in 2026, with most homeowners paying around $21,200.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $28.3/hr in the Jacksonville area and $28.8/hr in Miami-Fort Lauderdale-West Palm Beach. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Jacksonville and The Hammocks: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not really — the $300 gap is one-time, and smart timing and tighter quotes in The Hammocks can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik