Metal Roof Installation cost: Jacksonville vs Miami (2026)
Jacksonville runs 1% lower than Miami for metal roof installation — expect around $21,200 in Jacksonville against $21,500 in Miami, a difference of about $300.
Jacksonville FL
Lower costTypically around $21,200
Miami FL
Typically around $21,500
Jacksonville vs Miami: full breakdown
| Factor | Jacksonville | Miami |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,500 |
| Estimated range | $12,950–$29,450 | $13,100–$29,850 |
| Labor index (vs US) | ×0.94 | ×0.96 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $325 |
| Labor share | $12,700 | $12,900 |
| Materials/equipment | $8,500 | $8,600 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Jacksonville vs Miami
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Jacksonville | Miami |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,200–$18,050 |
| Standing-seam steel | $17,800–$34,350 | $18,050–$34,750 |
| Aluminum | $13,900–$27,500 | $14,100–$27,900 |
| Copper | $29,450–$58,650 | $29,850–$59,400 |
| Zinc | $27,500–$53,800 | $27,900–$54,450 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Jacksonville vs Miami
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | Miami |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,200–$16,050 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,150–$22,950 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,100–$29,850 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,050–$35,750 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,050–$41,650 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Jacksonville metro · about 9% below the US average installer wage.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Jacksonville vs Miami
Is metal roof installation cheaper in Jacksonville or Miami?
Jacksonville wins on price: metal roof installation runs about $21,200 there versus $21,500 in Miami, a gap of roughly $300 (1%) as of 2026.
Why does metal roof installation cost more in Miami than Jacksonville?
It comes down to labor: Miami indexes at 0.96 against Jacksonville's 0.94. The hot-vs-hot climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Jacksonville, FL?
In Jacksonville, metal roof installation typically runs $12,950–$29,450 in 2026, with most homeowners paying around $21,200.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $28.3/hr in Jacksonville compared with $28.8/hr in Miami-Fort Lauderdale-West Palm Beach (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Jacksonville and Miami, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not really — the $300 gap is one-time, and smart timing and tighter quotes in Miami can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik