Metal Roof Installation cost: Jacksonville vs Orlando (2026)
Budget-wise, metal roof installation in Jacksonville ($21,200) runs 6% less than in Orlando ($22,550), a roughly $1,350 spread.
Jacksonville FL
Lower costTypically around $21,200
Orlando FL
Typically around $22,550
Jacksonville vs Orlando: full breakdown
| Factor | Jacksonville | Orlando |
|---|---|---|
| Typical 2026 cost | $21,200 | $22,550 |
| Estimated range | $12,950–$29,450 | $13,750–$31,350 |
| Labor index (vs US) | ×0.94 | ×1.01 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,700 | $13,550 |
| Materials/equipment | $8,500 | $9,000 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
6% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Jacksonville vs Orlando
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Jacksonville | Orlando |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,600–$18,950 |
| Standing-seam steel | $17,800–$34,350 | $18,950–$36,550 |
| Aluminum | $13,900–$27,500 | $14,800–$29,300 |
| Copper | $29,450–$58,650 | $31,350–$62,450 |
| Zinc | $27,500–$53,800 | $29,300–$57,250 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Jacksonville vs Orlando
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | Orlando |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,550–$16,850 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,650–$24,100 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,750–$31,350 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,850–$37,600 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,950–$43,800 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Jacksonville metro · about 9% below the US average installer wage.
No BLS metro wage series for Orlando; we use Florida regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Jacksonville vs Orlando
Is metal roof installation cheaper in Jacksonville or Orlando?
In 2026, metal roof installation is cheaper in Jacksonville at about $21,200, versus $22,550 in Orlando — a difference of about $1,350 (6%).
Why does metal roof installation cost more in Orlando than Jacksonville?
The main driver is local labor rates: Orlando's labor index is 1.01 versus 0.94 in Jacksonville. Climate zone (hot vs hot) also shift the total.
How much is metal roof installation in Jacksonville, FL?
In Jacksonville, metal roof installation typically runs $12,950–$29,450 in 2026, with most homeowners paying around $21,200.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Jacksonville and Orlando: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $1,350 is a real gap, but it's a one-time cost you can partly offset in Orlando with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik