Metal Roof Installation cost: Jacksonville vs The Acreage (2026)
Budget-wise, metal roof installation in Jacksonville ($21,200) runs 1% less than in The Acreage ($21,500), a roughly $300 spread.
Jacksonville FL
Lower costTypically around $21,200
The Acreage FL
Typically around $21,500
Jacksonville vs The Acreage: full breakdown
| Factor | Jacksonville | The Acreage |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,500 |
| Estimated range | $12,950–$29,450 | $13,100–$29,850 |
| Labor index (vs US) | ×0.94 | ×0.96 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $325 |
| Labor share | $12,700 | $12,900 |
| Materials/equipment | $8,500 | $8,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Jacksonville vs The Acreage
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Jacksonville | The Acreage |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,200–$18,050 |
| Standing-seam steel | $17,800–$34,350 | $18,050–$34,750 |
| Aluminum | $13,900–$27,500 | $14,100–$27,900 |
| Copper | $29,450–$58,650 | $29,850–$59,400 |
| Zinc | $27,500–$53,800 | $27,900–$54,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Jacksonville vs The Acreage
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | The Acreage |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,200–$16,050 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,150–$22,950 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,100–$29,850 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,050–$35,750 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,050–$41,650 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Jacksonville metro · about 9% below the US average installer wage.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Jacksonville vs The Acreage
Is metal roof installation cheaper in Jacksonville or The Acreage?
Yes — The Acreage costs more. Expect around $21,500 for metal roof installation there against $21,200 in Jacksonville, about $300 (1%) apart in 2026.
Why does metal roof installation cost more in The Acreage than Jacksonville?
It comes down to labor: The Acreage indexes at 0.96 against Jacksonville's 0.94. The hot-vs-hot climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Jacksonville, FL?
Expect to pay $12,950 to $29,450 for metal roof installation in Jacksonville in 2026, averaging around $21,200.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $28.3/hr in Jacksonville compared with $28.8/hr in Miami-Fort Lauderdale-West Palm Beach (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Jacksonville and The Acreage: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $300 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in The Acreage can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik