Metal Roof Installation cost: Jacksonville vs Tamiami (2026)
Jacksonville runs 1% lower than Tamiami for metal roof installation — expect around $21,200 in Jacksonville against $21,500 in Tamiami, a difference of about $300.
Jacksonville FL
Lower costTypically around $21,200
Tamiami FL
Typically around $21,500
Jacksonville vs Tamiami: full breakdown
| Factor | Jacksonville | Tamiami |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,500 |
| Estimated range | $12,950–$29,450 | $13,100–$29,850 |
| Labor index (vs US) | ×0.94 | ×0.96 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $325 |
| Labor share | $12,700 | $12,900 |
| Materials/equipment | $8,500 | $8,600 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
1% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Jacksonville vs Tamiami
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Jacksonville | Tamiami |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,200–$18,050 |
| Standing-seam steel | $17,800–$34,350 | $18,050–$34,750 |
| Aluminum | $13,900–$27,500 | $14,100–$27,900 |
| Copper | $29,450–$58,650 | $29,850–$59,400 |
| Zinc | $27,500–$53,800 | $27,900–$54,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Jacksonville vs Tamiami
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | Tamiami |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,200–$16,050 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,150–$22,950 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,100–$29,850 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,050–$35,750 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,050–$41,650 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Jacksonville metro · about 9% below the US average installer wage.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Jacksonville vs Tamiami
Is metal roof installation cheaper in Jacksonville or Tamiami?
Jacksonville wins on price: metal roof installation runs about $21,200 there versus $21,500 in Tamiami, a gap of roughly $300 (1%) as of 2026.
Why does metal roof installation cost more in Tamiami than Jacksonville?
Labor rates explain most of it — 0.96 in Tamiami vs 0.94 in Jacksonville. A hot climate versus hot, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Jacksonville, FL?
Jacksonville homeowners can expect $12,950 to $29,450 for metal roof installation in 2026, with $21,200 the typical number.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $28.3/hr in the Jacksonville area and $28.8/hr in Miami-Fort Lauderdale-West Palm Beach. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Jacksonville and Tamiami, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $300 is a real gap, but it's a one-time cost you can partly offset in Tamiami with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik