Metal Roof Installation cost: Jacksonville vs St. Johns (2026)
Jacksonville and St. Johns are a near-perfect match on metal roof installation cost in 2026, both landing around $21,200.
Jacksonville FL
Typically around $21,200
St. Johns FL
Typically around $21,200
Jacksonville vs St. Johns: full breakdown
| Factor | Jacksonville | St. Johns |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,200 |
| Estimated range | $12,950–$29,450 | $12,950–$29,450 |
| Labor index (vs US) | ×0.94 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,700 | $12,700 |
| Materials/equipment | $8,500 | $8,500 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Jacksonville vs St. Johns
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Jacksonville | St. Johns |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,050–$17,800 |
| Standing-seam steel | $17,800–$34,350 | $17,800–$34,350 |
| Aluminum | $13,900–$27,500 | $13,900–$27,500 |
| Copper | $29,450–$58,650 | $29,450–$58,650 |
| Zinc | $27,500–$53,800 | $27,500–$53,800 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Jacksonville vs St. Johns
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | St. Johns |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,050–$15,850 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,000–$22,650 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $12,950–$29,450 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $15,850–$35,300 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $18,750–$41,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Jacksonville metro · about 9% below the US average installer wage.
Jacksonville metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Jacksonville vs St. Johns
Is metal roof installation cheaper in Jacksonville or St. Johns?
There's no meaningful difference: metal roof installation runs about $21,200 in both places.
Why does metal roof installation cost more in St. Johns than Jacksonville?
Labor rates explain most of it — 0.94 in St. Johns vs 0.94 in Jacksonville. A hot climate versus hot accounts for the rest.
How much is metal roof installation in Jacksonville, FL?
Jacksonville homeowners can expect $12,950 to $29,450 for metal roof installation in 2026, with $21,200 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $28.3/hr in the Jacksonville area versus $28.3/hr around Jacksonville (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Jacksonville and St. Johns: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Jacksonville and St. Johns. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik