Metal Roof Installation cost: Jacksonville vs Port St. Lucie (2026)
Jacksonville runs 4% lower than Port St. Lucie for metal roof installation — expect around $21,200 in Jacksonville against $22,150 in Port St. Lucie, a difference of about $950.
Jacksonville FL
Lower costTypically around $21,200
Port St. Lucie FL
Typically around $22,150
Jacksonville vs Port St. Lucie: full breakdown
| Factor | Jacksonville | Port St. Lucie |
|---|---|---|
| Typical 2026 cost | $21,200 | $22,150 |
| Estimated range | $12,950–$29,450 | $13,500–$30,800 |
| Labor index (vs US) | ×0.94 | ×0.99 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,700 | $13,300 |
| Materials/equipment | $8,500 | $8,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
4% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Jacksonville vs Port St. Lucie
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Jacksonville | Port St. Lucie |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,450–$18,600 |
| Standing-seam steel | $17,800–$34,350 | $18,600–$35,900 |
| Aluminum | $13,900–$27,500 | $14,500–$28,750 |
| Copper | $29,450–$58,650 | $30,800–$61,350 |
| Zinc | $27,500–$53,800 | $28,750–$56,250 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Jacksonville vs Port St. Lucie
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | Port St. Lucie |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,400–$16,550 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,450–$23,700 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,500–$30,800 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,550–$36,900 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,600–$43,000 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Jacksonville metro · about 9% below the US average installer wage.
No BLS metro wage series for Port St. Lucie; we use Florida regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Jacksonville vs Port St. Lucie
Is metal roof installation cheaper in Jacksonville or Port St. Lucie?
Yes — Port St. Lucie costs more. Expect around $22,150 for metal roof installation there against $21,200 in Jacksonville, about $950 (4%) apart in 2026.
Why does metal roof installation cost more in Port St. Lucie than Jacksonville?
Labor rates explain most of it — 0.99 in Port St. Lucie vs 0.94 in Jacksonville. A hot climate versus hot accounts for the rest.
How much is metal roof installation in Jacksonville, FL?
metal roof installation in Jacksonville runs $12,950–$29,450 as of 2026 — most jobs land near $21,200.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Jacksonville and Port St. Lucie, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $950 is a real gap, but it's a one-time cost you can partly offset in Port St. Lucie with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik