Metal Roof Installation cost: Jacksonville vs Port Saint Lucie (2026)
Jacksonville runs 4% lower than Port Saint Lucie for metal roof installation — expect around $21,200 in Jacksonville against $22,150 in Port Saint Lucie, a difference of about $950.
Jacksonville FL
Lower costTypically around $21,200
Port Saint Lucie FL
Typically around $22,150
Jacksonville vs Port Saint Lucie: full breakdown
| Factor | Jacksonville | Port Saint Lucie |
|---|---|---|
| Typical 2026 cost | $21,200 | $22,150 |
| Estimated range | $12,950–$29,450 | $13,500–$30,800 |
| Labor index (vs US) | ×0.94 | ×0.99 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,700 | $13,300 |
| Materials/equipment | $8,500 | $8,850 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
At 4%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Jacksonville vs Port Saint Lucie
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Jacksonville | Port Saint Lucie |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,450–$18,600 |
| Standing-seam steel | $17,800–$34,350 | $18,600–$35,900 |
| Aluminum | $13,900–$27,500 | $14,500–$28,750 |
| Copper | $29,450–$58,650 | $30,800–$61,350 |
| Zinc | $27,500–$53,800 | $28,750–$56,250 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Jacksonville vs Port Saint Lucie
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | Port Saint Lucie |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,400–$16,550 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,450–$23,700 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,500–$30,800 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,550–$36,900 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,600–$43,000 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Jacksonville metro · about 9% below the US average installer wage.
No BLS metro wage series for Port Saint Lucie; we use Florida regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Jacksonville vs Port Saint Lucie
Is metal roof installation cheaper in Jacksonville or Port Saint Lucie?
In 2026, metal roof installation is cheaper in Jacksonville at about $21,200, versus $22,150 in Port Saint Lucie — a difference of about $950 (4%).
Why does metal roof installation cost more in Port Saint Lucie than Jacksonville?
The main driver is local labor rates: Port Saint Lucie's labor index is 0.99 versus 0.94 in Jacksonville. Climate zone (hot vs hot) also shift the total.
How much is metal roof installation in Jacksonville, FL?
Expect to pay $12,950 to $29,450 for metal roof installation in Jacksonville in 2026, averaging around $21,200.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Jacksonville and Port Saint Lucie (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $950 gap is one-time, and smart timing and tighter quotes in Port Saint Lucie can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik