Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Jacksonville vs Plantation (2026)

The two metros aren't quite in sync on metal roof installation: Jacksonville sits 1% below Plantation, or roughly $21,200 versus $21,500 — about $300 apart.

Jacksonville FL

Lower cost
$12,950 $29,450

Typically around $21,200

Plantation FL

$13,100 $29,850

Typically around $21,500

metal roof installation runs about $300 (1%) more in Plantation than in Jacksonville, driven mostly by local labor rates.
Side by side

Jacksonville vs Plantation: full breakdown

FactorJacksonvillePlantation
Typical 2026 cost$21,200$21,500
Estimated range$12,950–$29,450$13,100–$29,850
Labor index (vs US)×0.94×0.96
Climate zoneHotHot
Climate factor×1.03×1.03
Local permit$275$325
Labor share$12,700$12,900
Materials/equipment$8,500$8,600

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

The verdict

Is the price difference a dealbreaker?

1% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Metal roof installation by type: Jacksonville vs Plantation

Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.

TypeJacksonvillePlantation
Corrugated steel (exposed fastener)$9,050$17,800$9,200$18,050
Standing-seam steel$17,800$34,350$18,050$34,750
Aluminum$13,900$27,500$14,100$27,900
Copper$29,450$58,650$29,850$59,400
Zinc$27,500$53,800$27,900$54,450

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

By size

Metal roof installation by roof size: Jacksonville vs Plantation

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeJacksonvillePlantation
1,000 sq ft (10 squares)$8,050$15,850$8,200$16,050
1,500 sq ft (15 squares)$11,000$22,650$11,150$22,950
2,000 sq ft (20 squares)$12,950$29,450$13,100$29,850
2,500 sq ft (25 squares)$15,850$35,300$16,050$35,750
3,000+ sq ft (30 squares)$18,750$41,150$19,050$41,650

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

Local labor reality

What roofing pros earn in each metro

Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.

Jacksonville, FL
$28.3/hr

Jacksonville metro · about 9% below the US average installer wage.

Plantation, FL
$28.8/hr

Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Jacksonville vs Plantation

Is metal roof installation cheaper in Jacksonville or Plantation?

Yes — Plantation costs more. Expect around $21,500 for metal roof installation there against $21,200 in Jacksonville, about $300 (1%) apart in 2026.

Why does metal roof installation cost more in Plantation than Jacksonville?

The main driver is local labor rates: Plantation's labor index is 0.96 versus 0.94 in Jacksonville. Climate zone (hot vs hot) and permit fees also shift the total.

How much is metal roof installation in Jacksonville, FL?

Jacksonville homeowners can expect $12,950 to $29,450 for metal roof installation in 2026, with $21,200 the typical number.

Do roofing pros really charge more in one city?

They do, and the BLS wage data confirms it: installers earn about $28.3/hr around Jacksonville versus $28.8/hr near Miami-Fort Lauderdale-West Palm Beach. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.

When is the cheapest time to buy metal roof installation — and does it differ by city?

No, the seasonal pattern is the same in Jacksonville and Plantation: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on metal roof installation cost?

Not really — the $300 gap is one-time, and smart timing and tighter quotes in Plantation can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik