Metal Roof Installation cost: Hialeah vs Jacksonville (2026)
Hialeah runs 1% higher than Jacksonville for metal roof installation — expect around $21,500 in Hialeah against $21,200 in Jacksonville, a difference of about $300.
Hialeah FL
Typically around $21,500
Jacksonville FL
Lower costTypically around $21,200
Hialeah vs Jacksonville: full breakdown
| Factor | Hialeah | Jacksonville |
|---|---|---|
| Typical 2026 cost | $21,500 | $21,200 |
| Estimated range | $13,100–$29,850 | $12,950–$29,450 |
| Labor index (vs US) | ×0.96 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $325 | $275 |
| Labor share | $12,900 | $12,700 |
| Materials/equipment | $8,600 | $8,500 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
That 1% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Hialeah vs Jacksonville
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Hialeah | Jacksonville |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,050 | $9,050–$17,800 |
| Standing-seam steel | $18,050–$34,750 | $17,800–$34,350 |
| Aluminum | $14,100–$27,900 | $13,900–$27,500 |
| Copper | $29,850–$59,400 | $29,450–$58,650 |
| Zinc | $27,900–$54,450 | $27,500–$53,800 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Hialeah vs Jacksonville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hialeah | Jacksonville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,050 | $8,050–$15,850 |
| 1,500 sq ft (15 squares) | $11,150–$22,950 | $11,000–$22,650 |
| 2,000 sq ft (20 squares) | $13,100–$29,850 | $12,950–$29,450 |
| 2,500 sq ft (25 squares) | $16,050–$35,750 | $15,850–$35,300 |
| 3,000+ sq ft (30 squares) | $19,050–$41,650 | $18,750–$41,150 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Jacksonville metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Hialeah vs Jacksonville
Is metal roof installation cheaper in Hialeah or Jacksonville?
Jacksonville wins on price: metal roof installation runs about $21,200 there versus $21,500 in Hialeah, a gap of roughly $300 (1%) as of 2026.
Why does metal roof installation cost more in Hialeah than Jacksonville?
It comes down to labor: Hialeah indexes at 0.96 against Jacksonville's 0.94. The hot-vs-hot climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Hialeah, FL?
In Hialeah, metal roof installation typically runs $13,100–$29,850 in 2026, with most homeowners paying around $21,500.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $28.8/hr around Miami-Fort Lauderdale-West Palm Beach versus $28.3/hr near Jacksonville. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Hialeah and Jacksonville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $300 is a real gap, but it's a one-time cost you can partly offset in Hialeah with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik