Metal Roof Installation cost: Jacksonville vs Kendale Lakes (2026)
The two metros aren't quite in sync on metal roof installation: Jacksonville sits 1% below Kendale Lakes, or roughly $21,200 versus $21,500 — about $300 apart.
Jacksonville FL
Lower costTypically around $21,200
Kendale Lakes FL
Typically around $21,500
Jacksonville vs Kendale Lakes: full breakdown
| Factor | Jacksonville | Kendale Lakes |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,500 |
| Estimated range | $12,950–$29,450 | $13,100–$29,850 |
| Labor index (vs US) | ×0.94 | ×0.96 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $325 |
| Labor share | $12,700 | $12,900 |
| Materials/equipment | $8,500 | $8,600 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Jacksonville vs Kendale Lakes
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Jacksonville | Kendale Lakes |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,050–$17,800 | $9,200–$18,050 |
| Standing-seam steel | $17,800–$34,350 | $18,050–$34,750 |
| Aluminum | $13,900–$27,500 | $14,100–$27,900 |
| Copper | $29,450–$58,650 | $29,850–$59,400 |
| Zinc | $27,500–$53,800 | $27,900–$54,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Jacksonville vs Kendale Lakes
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jacksonville | Kendale Lakes |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,200–$16,050 |
| 1,500 sq ft (15 squares) | $11,000–$22,650 | $11,150–$22,950 |
| 2,000 sq ft (20 squares) | $12,950–$29,450 | $13,100–$29,850 |
| 2,500 sq ft (25 squares) | $15,850–$35,300 | $16,050–$35,750 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,050–$41,650 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Jacksonville metro · about 9% below the US average installer wage.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Jacksonville vs Kendale Lakes
Is metal roof installation cheaper in Jacksonville or Kendale Lakes?
Jacksonville wins on price: metal roof installation runs about $21,200 there versus $21,500 in Kendale Lakes, a gap of roughly $300 (1%) as of 2026.
Why does metal roof installation cost more in Kendale Lakes than Jacksonville?
Labor rates explain most of it — 0.96 in Kendale Lakes vs 0.94 in Jacksonville. A hot climate versus hot, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Jacksonville, FL?
Expect to pay $12,950 to $29,450 for metal roof installation in Jacksonville in 2026, averaging around $21,200.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $28.3/hr around Jacksonville versus $28.8/hr near Miami-Fort Lauderdale-West Palm Beach. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Jacksonville and Kendale Lakes: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $300 is a real gap, but it's a one-time cost you can partly offset in Kendale Lakes with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik