Metal Roof Installation cost: Hollywood vs Orlando (2026)
In 2026, metal roof installation is about 5% less expensive in Hollywood than in Orlando. Most homeowners pay around $21,500 in Hollywood versus $22,550 in Orlando — a gap of roughly $1,050.
Hollywood FL
Lower costTypically around $21,500
Orlando FL
Typically around $22,550
Hollywood vs Orlando: full breakdown
| Factor | Hollywood | Orlando |
|---|---|---|
| Typical 2026 cost | $21,500 | $22,550 |
| Estimated range | $13,100–$29,850 | $13,750–$31,350 |
| Labor index (vs US) | ×0.96 | ×1.01 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $325 | $275 |
| Labor share | $12,900 | $13,550 |
| Materials/equipment | $8,600 | $9,000 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
How much should this gap actually matter?
At 5%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Hollywood vs Orlando
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Hollywood | Orlando |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,050 | $9,600–$18,950 |
| Standing-seam steel | $18,050–$34,750 | $18,950–$36,550 |
| Aluminum | $14,100–$27,900 | $14,800–$29,300 |
| Copper | $29,850–$59,400 | $31,350–$62,450 |
| Zinc | $27,900–$54,450 | $29,300–$57,250 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Hollywood vs Orlando
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hollywood | Orlando |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,050 | $8,550–$16,850 |
| 1,500 sq ft (15 squares) | $11,150–$22,950 | $11,650–$24,100 |
| 2,000 sq ft (20 squares) | $13,100–$29,850 | $13,750–$31,350 |
| 2,500 sq ft (25 squares) | $16,050–$35,750 | $16,850–$37,600 |
| 3,000+ sq ft (30 squares) | $19,050–$41,650 | $19,950–$43,800 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
No BLS metro wage series for Orlando; we use Florida regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Hollywood vs Orlando
Is metal roof installation cheaper in Hollywood or Orlando?
In 2026, metal roof installation is cheaper in Hollywood at about $21,500, versus $22,550 in Orlando — a difference of about $1,050 (5%).
Why does metal roof installation cost more in Orlando than Hollywood?
Orlando's higher labor index (1.01 vs 0.96 in Hollywood) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Hollywood, FL?
Hollywood homeowners can expect $13,100 to $29,850 for metal roof installation in 2026, with $21,500 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Hollywood and Orlando: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $1,050 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Orlando can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik