Roofing · Hollywood, FL
How much does metal roof installation cost in Hollywood, FL? (2026)
In Hollywood, metal roof installation runs $13,100–$29,850, with most paying around $21,500 — in line with the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,500
- Typical cost
- $21,500
- Labor vs US
- +12%
- Climate
- Hot
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Hollywood
- A metal roof installation in Hollywood typically runs $13,100–$29,850, with most homeowners paying about $21,500 — in line with the national average.
- Local labor in Hollywood is +12% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Permit costs are baked in: Hollywood charges about $325 for the Roofing permit.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Time it right and you can save 5–10%: the best window to book is Late spring to early fall (dry, 45–85°F).
What goes into the price in Hollywood
A typical Hollywood metal roof installation of $21,500 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Hollywood 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $5,100 – $11,800 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $7,675 – $17,725 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $325 |
| Total installed cost | $13,100 – $29,850 |
Split from the Hollywood estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Hollywood
- Hollywood's labor rates sit about 12% higher than the national average (based on price levels for the Miami-Fort Lauderdale-West Palm Beach metro area), pushing the price up.
- Because Hollywood sits in a hot climate zone, metal roof installation costs run about 3% higher than a neutral-climate baseline.
- A Roofing permit in Hollywood costs around $325, included above.
Metal Roof Installation cost by roof size in Hollywood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Hollywood 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,200 – $16,050 |
| 1,500 sq ft (15 squares) | $11,150 – $22,950 |
| 2,000 sq ft (20 squares) | $13,100 – $29,850 |
| 2,500 sq ft (25 squares) | $16,050 – $35,750 |
| 3,000+ sq ft (30 squares) | $19,050 – $41,650 |
National size ranges localized to Hollywood labor and climate.
Metal Roof Installation cost by type in Hollywood
| Corrugated steel (exposed fastener) | $9,200 – $18,100 |
| Standing-seam steel | $18,100 – $34,950 |
| Aluminum | $14,150 – $28,000 |
| Copper | $30,000 – $59,650 |
| Zinc | $28,000 – $54,700 |
Adjusted to Hollywood from national type-level ranges.
Metal Roof Installation cost by efficiency in Hollywood
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,200 – $18,050 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,100 – $29,850 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,950 – $49,550 |
Labor vs. materials in Hollywood
Install crew, removal, permit & startup — the part Hollywood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,500 Hollywood project; your mix varies with scope.
Skilled installers in the Miami-Fort Lauderdale-West Palm Beach area earn about $28.8/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Hollywood labor adjustment | ×0.96 |
| hot climate factor | ×1.03 |
| Local permit | +$325 |
| Hollywood estimate | $13,100 – $29,850 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Tear-off of the old roof
- Underlayment, fasteners and trim
- Metal panels or standing-seam system
What affects the cost
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
Ways to save on metal roof installation in Hollywood
- Steel standing seam balances cost and longevity
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Hollywood?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Hollywood
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Hollywood?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Hollywood, FL
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Hollywood, FL labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Hollywood, FL labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Hollywood
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why metal roof installation quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Hollywood Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Hollywood
How much does metal roof installation cost in Hollywood, FL?
In Hollywood, metal roof installation typically costs $13,100 to $29,850 in 2026, with most homeowners paying around $21,500. The figure is adjusted for local labor rates, hot-climate factors and permit fees.
Is metal roof installation more expensive in Hollywood than average?
Labor is the biggest lever here: at an index of 0.96 versus the US average, Hollywood ends up about the same as the national average., before the Roofing permit, which runs about $325.
Do I need a permit for metal roof installation in Hollywood?
Most Hollywood jurisdictions require a Roofing permit for this work. Budget roughly $325 for the permit; it is already included in the estimate above.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. That's the baseline — the price moves from there. Four things drive the number more than anything else — equipment/material grade, home size and complexity, local labor, and your hot climate zone.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Hollywood using the BLS metro wage data labor index (×0.96 here), the IECC hot-climate factor (×1.03) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Hollywood metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Hollywood
Homeowners in Hollywood often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Hollywood
Browse local 2026 costs for every home project in Hollywood, FL.