Metal Roof Installation cost: Hollywood vs Jacksonville (2026)
In 2026, metal roof installation is about 1% more expensive in Hollywood than in Jacksonville. Most homeowners pay around $21,500 in Hollywood versus $21,200 in Jacksonville — a gap of roughly $300.
Hollywood FL
Typically around $21,500
Jacksonville FL
Lower costTypically around $21,200
Hollywood vs Jacksonville: full breakdown
| Factor | Hollywood | Jacksonville |
|---|---|---|
| Typical 2026 cost | $21,500 | $21,200 |
| Estimated range | $13,100–$29,850 | $12,950–$29,450 |
| Labor index (vs US) | ×0.96 | ×0.94 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $325 | $275 |
| Labor share | $12,900 | $12,700 |
| Materials/equipment | $8,600 | $8,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
That 1% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Hollywood vs Jacksonville
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Hollywood | Jacksonville |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,050 | $9,050–$17,800 |
| Standing-seam steel | $18,050–$34,750 | $17,800–$34,350 |
| Aluminum | $14,100–$27,900 | $13,900–$27,500 |
| Copper | $29,850–$59,400 | $29,450–$58,650 |
| Zinc | $27,900–$54,450 | $27,500–$53,800 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Hollywood vs Jacksonville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hollywood | Jacksonville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,050 | $8,050–$15,850 |
| 1,500 sq ft (15 squares) | $11,150–$22,950 | $11,000–$22,650 |
| 2,000 sq ft (20 squares) | $13,100–$29,850 | $12,950–$29,450 |
| 2,500 sq ft (25 squares) | $16,050–$35,750 | $15,850–$35,300 |
| 3,000+ sq ft (30 squares) | $19,050–$41,650 | $18,750–$41,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Jacksonville metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Hollywood vs Jacksonville
Is metal roof installation cheaper in Hollywood or Jacksonville?
Yes — Hollywood costs more. Expect around $21,500 for metal roof installation there against $21,200 in Jacksonville, about $300 (1%) apart in 2026.
Why does metal roof installation cost more in Hollywood than Jacksonville?
The main driver is local labor rates: Hollywood's labor index is 0.96 versus 0.94 in Jacksonville. Climate zone (hot vs hot) and permit fees also shift the total.
How much is metal roof installation in Hollywood, FL?
metal roof installation in Hollywood runs $13,100–$29,850 as of 2026 — most jobs land near $21,500.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $28.8/hr in Miami-Fort Lauderdale-West Palm Beach compared with $28.3/hr in Jacksonville (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Hollywood and Jacksonville (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $300 gap is one-time, and smart timing and tighter quotes in Hollywood can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik