Metal Roof Installation cost: Hendersonville vs Nashville (2026)
Hendersonville and Nashville are a near-perfect match on metal roof installation cost in 2026, both landing around $21,050.
Hendersonville TN
Typically around $21,050
Nashville TN
Typically around $21,050
Hendersonville vs Nashville: full breakdown
| Factor | Hendersonville | Nashville |
|---|---|---|
| Typical 2026 cost | $21,050 | $21,050 |
| Estimated range | $12,850–$29,250 | $12,850–$29,250 |
| Labor index (vs US) | ×0.97 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $12,650 | $12,650 |
| Materials/equipment | $8,400 | $8,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Hendersonville vs Nashville
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Hendersonville | Nashville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,950–$17,650 | $8,950–$17,650 |
| Standing-seam steel | $17,650–$34,100 | $17,650–$34,100 |
| Aluminum | $13,800–$27,350 | $13,800–$27,350 |
| Copper | $29,250–$58,250 | $29,250–$58,250 |
| Zinc | $27,350–$53,450 | $27,350–$53,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Hendersonville vs Nashville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hendersonville | Nashville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,750 | $8,000–$15,750 |
| 1,500 sq ft (15 squares) | $10,900–$22,500 | $10,900–$22,500 |
| 2,000 sq ft (20 squares) | $12,850–$29,250 | $12,850–$29,250 |
| 2,500 sq ft (25 squares) | $15,750–$35,050 | $15,750–$35,050 |
| 3,000+ sq ft (30 squares) | $18,650–$40,850 | $18,650–$40,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Hendersonville vs Nashville
Is metal roof installation cheaper in Hendersonville or Nashville?
There's no meaningful difference: metal roof installation runs about $21,050 in both places.
Why does metal roof installation cost more in Nashville than Hendersonville?
Labor rates explain most of it — 0.97 in Nashville vs 0.97 in Hendersonville. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Hendersonville, TN?
metal roof installation in Hendersonville runs $12,850–$29,250 as of 2026 — most jobs land near $21,050.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.4/hr in the Nashville-Davidson--Murfreesboro--Franklin area versus $29.4/hr around Nashville-Davidson--Murfreesboro--Franklin (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Hendersonville and Nashville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Hendersonville and Nashville cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik