Metal Roof Installation cost: Clarksville vs Hendersonville (2026)
The two metros aren't quite in sync on metal roof installation: Clarksville sits 2% below Hendersonville, or roughly $20,600 versus $21,050 — about $450 apart.
Clarksville TN
Lower costTypically around $20,600
Hendersonville TN
Typically around $21,050
Clarksville vs Hendersonville: full breakdown
| Factor | Clarksville | Hendersonville |
|---|---|---|
| Typical 2026 cost | $20,600 | $21,050 |
| Estimated range | $12,550–$28,650 | $12,850–$29,250 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $275 |
| Labor share | $12,350 | $12,650 |
| Materials/equipment | $8,250 | $8,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
2% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Clarksville vs Hendersonville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Clarksville | Hendersonville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,750–$17,300 | $8,950–$17,650 |
| Standing-seam steel | $17,300–$33,350 | $17,650–$34,100 |
| Aluminum | $13,500–$26,750 | $13,800–$27,350 |
| Copper | $28,650–$57,000 | $29,250–$58,250 |
| Zinc | $26,750–$52,300 | $27,350–$53,450 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Clarksville vs Hendersonville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Clarksville | Hendersonville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,400 | $8,000–$15,750 |
| 1,500 sq ft (15 squares) | $10,650–$22,000 | $10,900–$22,500 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,850–$29,250 |
| 2,500 sq ft (25 squares) | $15,400–$34,300 | $15,750–$35,050 |
| 3,000+ sq ft (30 squares) | $18,200–$40,000 | $18,650–$40,850 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Clarksville vs Hendersonville
Is metal roof installation cheaper in Clarksville or Hendersonville?
Clarksville comes out ahead here, at roughly $20,600 for metal roof installation compared with $21,050 in Hendersonville — a 2% ($450) gap as of 2026.
Why does metal roof installation cost more in Hendersonville than Clarksville?
It comes down to labor: Hendersonville indexes at 0.97 against Clarksville's 0.95. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Clarksville, TN?
Clarksville homeowners can expect $12,550 to $28,650 for metal roof installation in 2026, with $20,600 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Clarksville and Hendersonville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $450 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Hendersonville can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik