Metal Roof Installation cost: Hendersonville vs Knoxville (2026)
Budget-wise, metal roof installation in Hendersonville ($21,050) runs 2% more than in Knoxville ($20,600), a roughly $450 spread.
Hendersonville TN
Typically around $21,050
Knoxville TN
Lower costTypically around $20,600
Hendersonville vs Knoxville: full breakdown
| Factor | Hendersonville | Knoxville |
|---|---|---|
| Typical 2026 cost | $21,050 | $20,600 |
| Estimated range | $12,850–$29,250 | $12,550–$28,650 |
| Labor index (vs US) | ×0.97 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $250 |
| Labor share | $12,650 | $12,350 |
| Materials/equipment | $8,400 | $8,250 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
2% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Hendersonville vs Knoxville
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Hendersonville | Knoxville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,950–$17,650 | $8,750–$17,300 |
| Standing-seam steel | $17,650–$34,100 | $17,300–$33,350 |
| Aluminum | $13,800–$27,350 | $13,500–$26,750 |
| Copper | $29,250–$58,250 | $28,650–$57,000 |
| Zinc | $27,350–$53,450 | $26,750–$52,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Hendersonville vs Knoxville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hendersonville | Knoxville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,750 | $7,800–$15,400 |
| 1,500 sq ft (15 squares) | $10,900–$22,500 | $10,650–$22,000 |
| 2,000 sq ft (20 squares) | $12,850–$29,250 | $12,550–$28,650 |
| 2,500 sq ft (25 squares) | $15,750–$35,050 | $15,400–$34,300 |
| 3,000+ sq ft (30 squares) | $18,650–$40,850 | $18,200–$40,000 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
No BLS metro wage series for Knoxville; we use Tennessee regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Hendersonville vs Knoxville
Is metal roof installation cheaper in Hendersonville or Knoxville?
Knoxville wins on price: metal roof installation runs about $20,600 there versus $21,050 in Hendersonville, a gap of roughly $450 (2%) as of 2026.
Why does metal roof installation cost more in Hendersonville than Knoxville?
Hendersonville's higher labor index (0.97 vs 0.95 in Knoxville) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Hendersonville, TN?
In Hendersonville, metal roof installation typically runs $12,850–$29,250 in 2026, with most homeowners paying around $21,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Hendersonville and Knoxville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $450 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Hendersonville can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik