Metal Roof Installation cost: Fort Worth vs Garland (2026)
Metal roof installation costs about the same in Fort Worth and Garland in 2026 — roughly $21,850 in each.
Fort Worth TX
Typically around $21,850
Garland TX
Typically around $21,850
Fort Worth vs Garland: full breakdown
| Factor | Fort Worth | Garland |
|---|---|---|
| Typical 2026 cost | $21,850 | $21,850 |
| Estimated range | $13,300–$30,350 | $13,300–$30,350 |
| Labor index (vs US) | ×0.97 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,100 | $13,100 |
| Materials/equipment | $8,750 | $8,750 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
No real cost edge either way
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Fort Worth vs Garland
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Fort Worth | Garland |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,300–$18,300 | $9,300–$18,300 |
| Standing-seam steel | $18,300–$35,350 | $18,300–$35,350 |
| Aluminum | $14,300–$28,350 | $14,300–$28,350 |
| Copper | $30,350–$60,350 | $30,350–$60,350 |
| Zinc | $28,350–$55,350 | $28,350–$55,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Fort Worth vs Garland
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fort Worth | Garland |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,300 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $11,300–$23,300 | $11,300–$23,300 |
| 2,000 sq ft (20 squares) | $13,300–$30,350 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $16,300–$36,350 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $19,300–$42,350 | $19,300–$42,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Fort Worth vs Garland
Is metal roof installation cheaper in Fort Worth or Garland?
metal roof installation costs about the same in both — roughly $21,850 in each city.
Why does metal roof installation cost more in Garland than Fort Worth?
Labor rates explain most of it — 0.97 in Garland vs 0.97 in Fort Worth. A hot climate versus hot accounts for the rest.
How much is metal roof installation in Fort Worth, TX?
metal roof installation in Fort Worth runs $13,300–$30,350 as of 2026 — most jobs land near $21,850.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $29.7/hr in Dallas-Fort Worth-Arlington compared with $29.7/hr in Dallas-Fort Worth-Arlington (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Fort Worth and Garland, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Fort Worth and Garland — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik