Metal Roof Installation cost: Fort Worth vs San Antonio (2026)
Budget-wise, metal roof installation in Fort Worth ($21,850) runs 3% more than in San Antonio ($21,250), a roughly $600 spread.
Fort Worth TX
Typically around $21,850
San Antonio TX
Lower costTypically around $21,250
Fort Worth vs San Antonio: full breakdown
| Factor | Fort Worth | San Antonio |
|---|---|---|
| Typical 2026 cost | $21,850 | $21,250 |
| Estimated range | $13,300–$30,350 | $12,950–$29,550 |
| Labor index (vs US) | ×0.97 | ×0.95 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $275 |
| Labor share | $13,100 | $12,750 |
| Materials/equipment | $8,750 | $8,500 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
That 3% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Fort Worth vs San Antonio
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Fort Worth | San Antonio |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,300–$18,300 | $9,050–$17,850 |
| Standing-seam steel | $18,300–$35,350 | $17,850–$34,450 |
| Aluminum | $14,300–$28,350 | $13,950–$27,600 |
| Copper | $30,350–$60,350 | $29,550–$58,850 |
| Zinc | $28,350–$55,350 | $27,600–$53,950 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Fort Worth vs San Antonio
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fort Worth | San Antonio |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,300 | $8,100–$15,900 |
| 1,500 sq ft (15 squares) | $11,300–$23,300 | $11,000–$22,750 |
| 2,000 sq ft (20 squares) | $13,300–$30,350 | $12,950–$29,550 |
| 2,500 sq ft (25 squares) | $16,300–$36,350 | $15,900–$35,400 |
| 3,000+ sq ft (30 squares) | $19,300–$42,350 | $18,800–$41,300 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
San Antonio-New Braunfels metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Fort Worth vs San Antonio
Is metal roof installation cheaper in Fort Worth or San Antonio?
San Antonio wins on price: metal roof installation runs about $21,250 there versus $21,850 in Fort Worth, a gap of roughly $600 (3%) as of 2026.
Why does metal roof installation cost more in Fort Worth than San Antonio?
It comes down to labor: Fort Worth indexes at 0.97 against San Antonio's 0.95. The hot-vs-hot climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Fort Worth, TX?
In Fort Worth, metal roof installation typically runs $13,300–$30,350 in 2026, with most homeowners paying around $21,850.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $29.7/hr in Dallas-Fort Worth-Arlington compared with $28.4/hr in San Antonio-New Braunfels (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Fort Worth and San Antonio, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $600 difference is real but one-time, and you can often close most of it in Fort Worth by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik