Metal Roof Installation cost: Dallas vs Fort Worth (2026)
Metal roof installation costs about the same in Dallas and Fort Worth in 2026 — roughly $21,850 in each.
Dallas TX
Typically around $21,850
Fort Worth TX
Typically around $21,850
Dallas vs Fort Worth: full breakdown
| Factor | Dallas | Fort Worth |
|---|---|---|
| Typical 2026 cost | $21,850 | $21,850 |
| Estimated range | $13,300–$30,350 | $13,300–$30,350 |
| Labor index (vs US) | ×0.97 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $13,100 | $13,100 |
| Materials/equipment | $8,750 | $8,750 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
No real cost edge either way
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Dallas vs Fort Worth
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Dallas | Fort Worth |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,300–$18,300 | $9,300–$18,300 |
| Standing-seam steel | $18,300–$35,350 | $18,300–$35,350 |
| Aluminum | $14,300–$28,350 | $14,300–$28,350 |
| Copper | $30,350–$60,350 | $30,350–$60,350 |
| Zinc | $28,350–$55,350 | $28,350–$55,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Dallas vs Fort Worth
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Dallas | Fort Worth |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,300 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $11,300–$23,300 | $11,300–$23,300 |
| 2,000 sq ft (20 squares) | $13,300–$30,350 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $16,300–$36,350 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $19,300–$42,350 | $19,300–$42,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Dallas vs Fort Worth
Is metal roof installation cheaper in Dallas or Fort Worth?
metal roof installation costs about the same in both — roughly $21,850 in each city.
Why does metal roof installation cost more in Fort Worth than Dallas?
The main driver is local labor rates: Fort Worth's labor index is 0.97 versus 0.97 in Dallas. Climate zone (hot vs hot) also shift the total.
How much is metal roof installation in Dallas, TX?
metal roof installation in Dallas runs $13,300–$30,350 as of 2026 — most jobs land near $21,850.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.7/hr in the Dallas-Fort Worth-Arlington area versus $29.7/hr around Dallas-Fort Worth-Arlington (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Dallas and Fort Worth (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Dallas and Fort Worth cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik