Metal Roof Installation cost: Fort Worth vs Frisco (2026)
The two metros aren't quite in sync on metal roof installation: Fort Worth sits 12% above Frisco, or roughly $21,850 versus $19,450 — about $2,400 apart.
Fort Worth TX
Typically around $21,850
Frisco TX
Lower costTypically around $19,450
Fort Worth vs Frisco: full breakdown
| Factor | Fort Worth | Frisco |
|---|---|---|
| Typical 2026 cost | $21,850 | $19,450 |
| Estimated range | $13,300–$30,350 | $11,850–$27,050 |
| Labor index (vs US) | ×0.97 | ×0.87 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $250 |
| Labor share | $13,100 | $11,650 |
| Materials/equipment | $8,750 | $7,800 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
A 12% spread (roughly $2,400) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Fort Worth typically recover some of it.
Metal roof installation by type: Fort Worth vs Frisco
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Fort Worth | Frisco |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,300–$18,300 | $8,300–$16,300 |
| Standing-seam steel | $18,300–$35,350 | $16,300–$31,500 |
| Aluminum | $14,300–$28,350 | $12,750–$25,250 |
| Copper | $30,350–$60,350 | $27,050–$53,800 |
| Zinc | $28,350–$55,350 | $25,250–$49,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Fort Worth vs Frisco
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fort Worth | Frisco |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,300 | $7,400–$14,550 |
| 1,500 sq ft (15 squares) | $11,300–$23,300 | $10,050–$20,800 |
| 2,000 sq ft (20 squares) | $13,300–$30,350 | $11,850–$27,050 |
| 2,500 sq ft (25 squares) | $16,300–$36,350 | $14,550–$32,400 |
| 3,000+ sq ft (30 squares) | $19,300–$42,350 | $17,200–$37,750 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
McAllen-Edinburg-Mission metro · about 22% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Fort Worth vs Frisco
Is metal roof installation cheaper in Fort Worth or Frisco?
Frisco comes out ahead here, at roughly $19,450 for metal roof installation compared with $21,850 in Fort Worth — a 12% ($2,400) gap as of 2026.
Why does metal roof installation cost more in Fort Worth than Frisco?
Fort Worth's higher labor index (0.97 vs 0.87 in Frisco) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Fort Worth, TX?
Fort Worth homeowners can expect $13,300 to $30,350 for metal roof installation in 2026, with $21,850 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29.7/hr in the Dallas-Fort Worth-Arlington area versus $24.2/hr around McAllen-Edinburg-Mission (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Fort Worth and Frisco: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Not really — the $2,400 gap is one-time, and smart timing and tighter quotes in Fort Worth can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik