Metal Roof Installation cost: Cordova vs New South Memphis (2026)
Cordova and New South Memphis are a near-perfect match on metal roof installation cost in 2026, both landing around $20,850.
Cordova TN
Typically around $20,850
New South Memphis TN
Typically around $20,850
Cordova vs New South Memphis: full breakdown
| Factor | Cordova | New South Memphis |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$29,000 | $12,700–$29,000 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
A wash — choose on quality, not city
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Cordova vs New South Memphis
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Cordova | New South Memphis |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,900–$17,500 | $8,900–$17,500 |
| Standing-seam steel | $17,500–$33,800 | $17,500–$33,800 |
| Aluminum | $13,650–$27,100 | $13,650–$27,100 |
| Copper | $29,000–$57,750 | $29,000–$57,750 |
| Zinc | $27,100–$52,950 | $27,100–$52,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Cordova vs New South Memphis
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Cordova | New South Memphis |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,600 | $7,900–$15,600 |
| 1,500 sq ft (15 squares) | $10,800–$22,300 | $10,800–$22,300 |
| 2,000 sq ft (20 squares) | $12,700–$29,000 | $12,700–$29,000 |
| 2,500 sq ft (25 squares) | $15,600–$34,750 | $15,600–$34,750 |
| 3,000+ sq ft (30 squares) | $18,450–$40,500 | $18,450–$40,500 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Memphis metro · about 7% below the US average installer wage.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Cordova vs New South Memphis
Is metal roof installation cheaper in Cordova or New South Memphis?
Not really — both cities land at almost the same number for metal roof installation, around $20,850 each.
Why does metal roof installation cost more in New South Memphis than Cordova?
New South Memphis's higher labor index (0.96 vs 0.96 in Cordova) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Cordova, TN?
metal roof installation in Cordova runs $12,700–$29,000 as of 2026 — most jobs land near $20,850.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $29/hr in the Memphis area and $29/hr in Memphis. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Cordova and New South Memphis: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Cordova and New South Memphis. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik