Metal Roof Installation cost: Cordova vs Memphis (2026)
In 2026, Cordova and Memphis land on nearly identical metal roof installation pricing — about $20,850 either way.
Cordova TN
Typically around $20,850
Memphis TN
Typically around $20,850
Cordova vs Memphis: full breakdown
| Factor | Cordova | Memphis |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$29,000 | $12,700–$29,000 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Cordova vs Memphis
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Cordova | Memphis |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,900–$17,500 | $8,900–$17,500 |
| Standing-seam steel | $17,500–$33,800 | $17,500–$33,800 |
| Aluminum | $13,650–$27,100 | $13,650–$27,100 |
| Copper | $29,000–$57,750 | $29,000–$57,750 |
| Zinc | $27,100–$52,950 | $27,100–$52,950 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Cordova vs Memphis
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Cordova | Memphis |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,600 | $7,900–$15,600 |
| 1,500 sq ft (15 squares) | $10,800–$22,300 | $10,800–$22,300 |
| 2,000 sq ft (20 squares) | $12,700–$29,000 | $12,700–$29,000 |
| 2,500 sq ft (25 squares) | $15,600–$34,750 | $15,600–$34,750 |
| 3,000+ sq ft (30 squares) | $18,450–$40,500 | $18,450–$40,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Memphis metro · about 7% below the US average installer wage.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Cordova vs Memphis
Is metal roof installation cheaper in Cordova or Memphis?
Practically identical — expect around $20,850 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Memphis than Cordova?
Labor rates explain most of it — 0.96 in Memphis vs 0.96 in Cordova. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Cordova, TN?
Cordova homeowners can expect $12,700 to $29,000 for metal roof installation in 2026, with $20,850 the typical number.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $29/hr in the Memphis area and $29/hr in Memphis. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Cordova and Memphis: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Cordova and Memphis cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik