Metal Roof Installation cost: Cordova vs Nashville (2026)
Budget-wise, metal roof installation in Cordova ($20,850) runs 1% less than in Nashville ($21,050), a roughly $200 spread.
Cordova TN
Lower costTypically around $20,850
Nashville TN
Typically around $21,050
Cordova vs Nashville: full breakdown
| Factor | Cordova | Nashville |
|---|---|---|
| Typical 2026 cost | $20,850 | $21,050 |
| Estimated range | $12,700–$29,000 | $12,850–$29,250 |
| Labor index (vs US) | ×0.96 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $275 |
| Labor share | $12,500 | $12,650 |
| Materials/equipment | $8,350 | $8,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Cordova vs Nashville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Cordova | Nashville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,900–$17,500 | $8,950–$17,650 |
| Standing-seam steel | $17,500–$33,800 | $17,650–$34,100 |
| Aluminum | $13,650–$27,100 | $13,800–$27,350 |
| Copper | $29,000–$57,750 | $29,250–$58,250 |
| Zinc | $27,100–$52,950 | $27,350–$53,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Cordova vs Nashville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Cordova | Nashville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,600 | $8,000–$15,750 |
| 1,500 sq ft (15 squares) | $10,800–$22,300 | $10,900–$22,500 |
| 2,000 sq ft (20 squares) | $12,700–$29,000 | $12,850–$29,250 |
| 2,500 sq ft (25 squares) | $15,600–$34,750 | $15,750–$35,050 |
| 3,000+ sq ft (30 squares) | $18,450–$40,500 | $18,650–$40,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Memphis metro · about 7% below the US average installer wage.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Cordova vs Nashville
Is metal roof installation cheaper in Cordova or Nashville?
In 2026, metal roof installation is cheaper in Cordova at about $20,850, versus $21,050 in Nashville — a difference of about $200 (1%).
Why does metal roof installation cost more in Nashville than Cordova?
Labor rates explain most of it — 0.97 in Nashville vs 0.96 in Cordova. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Cordova, TN?
In Cordova, metal roof installation typically runs $12,700–$29,000 in 2026, with most homeowners paying around $20,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $29/hr around Memphis versus $29.4/hr near Nashville-Davidson--Murfreesboro--Franklin. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Cordova and Nashville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $200 difference is real but one-time, and you can often close most of it in Nashville by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik