Metal Roof Installation cost: Clarksville vs Collierville (2026)
The two metros aren't quite in sync on metal roof installation: Clarksville sits 1% below Collierville, or roughly $20,600 versus $20,850 — about $250 apart.
Clarksville TN
Lower costTypically around $20,600
Collierville TN
Typically around $20,850
Clarksville vs Collierville: full breakdown
| Factor | Clarksville | Collierville |
|---|---|---|
| Typical 2026 cost | $20,600 | $20,850 |
| Estimated range | $12,550–$28,650 | $12,700–$29,000 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,350 | $12,500 |
| Materials/equipment | $8,250 | $8,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Clarksville vs Collierville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Clarksville | Collierville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,750–$17,300 | $8,900–$17,500 |
| Standing-seam steel | $17,300–$33,350 | $17,500–$33,800 |
| Aluminum | $13,500–$26,750 | $13,650–$27,100 |
| Copper | $28,650–$57,000 | $29,000–$57,750 |
| Zinc | $26,750–$52,300 | $27,100–$52,950 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Clarksville vs Collierville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Clarksville | Collierville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,400 | $7,900–$15,600 |
| 1,500 sq ft (15 squares) | $10,650–$22,000 | $10,800–$22,300 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,700–$29,000 |
| 2,500 sq ft (25 squares) | $15,400–$34,300 | $15,600–$34,750 |
| 3,000+ sq ft (30 squares) | $18,200–$40,000 | $18,450–$40,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Clarksville vs Collierville
Is metal roof installation cheaper in Clarksville or Collierville?
In 2026, metal roof installation is cheaper in Clarksville at about $20,600, versus $20,850 in Collierville — a difference of about $250 (1%).
Why does metal roof installation cost more in Collierville than Clarksville?
Labor rates explain most of it — 0.96 in Collierville vs 0.95 in Clarksville. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Clarksville, TN?
In Clarksville, metal roof installation typically runs $12,550–$28,650 in 2026, with most homeowners paying around $20,600.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Clarksville and Collierville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $250 difference is real but one-time, and you can often close most of it in Collierville by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik