Metal Roof Installation cost: Clarksville vs Memphis (2026)
In 2026, metal roof installation is about 1% less expensive in Clarksville than in Memphis. Most homeowners pay around $20,600 in Clarksville versus $20,850 in Memphis — a gap of roughly $250.
Clarksville TN
Lower costTypically around $20,600
Memphis TN
Typically around $20,850
Clarksville vs Memphis: full breakdown
| Factor | Clarksville | Memphis |
|---|---|---|
| Typical 2026 cost | $20,600 | $20,850 |
| Estimated range | $12,550–$28,650 | $12,700–$29,000 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,350 | $12,500 |
| Materials/equipment | $8,250 | $8,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Clarksville vs Memphis
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Clarksville | Memphis |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,750–$17,300 | $8,900–$17,500 |
| Standing-seam steel | $17,300–$33,350 | $17,500–$33,800 |
| Aluminum | $13,500–$26,750 | $13,650–$27,100 |
| Copper | $28,650–$57,000 | $29,000–$57,750 |
| Zinc | $26,750–$52,300 | $27,100–$52,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Clarksville vs Memphis
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Clarksville | Memphis |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,400 | $7,900–$15,600 |
| 1,500 sq ft (15 squares) | $10,650–$22,000 | $10,800–$22,300 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,700–$29,000 |
| 2,500 sq ft (25 squares) | $15,400–$34,300 | $15,600–$34,750 |
| 3,000+ sq ft (30 squares) | $18,200–$40,000 | $18,450–$40,500 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Clarksville vs Memphis
Is metal roof installation cheaper in Clarksville or Memphis?
In 2026, metal roof installation is cheaper in Clarksville at about $20,600, versus $20,850 in Memphis — a difference of about $250 (1%).
Why does metal roof installation cost more in Memphis than Clarksville?
It comes down to labor: Memphis indexes at 0.96 against Clarksville's 0.95. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Clarksville, TN?
In Clarksville, metal roof installation typically runs $12,550–$28,650 in 2026, with most homeowners paying around $20,600.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Clarksville and Memphis (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $250 gap is one-time, and smart timing and tighter quotes in Memphis can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik