Metal Roof Installation cost: Brooklyn Park vs St. Paul (2026)
Metal roof installation costs about the same in Brooklyn Park and St. Paul in 2026 — roughly $25,050 in each.
Brooklyn Park MN
Typically around $25,050
St. Paul MN
Typically around $25,050
Brooklyn Park vs St. Paul: full breakdown
| Factor | Brooklyn Park | St. Paul |
|---|---|---|
| Typical 2026 cost | $25,050 | $25,050 |
| Estimated range | $15,250–$34,850 | $15,250–$34,850 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $15,050 | $15,050 |
| Materials/equipment | $10,000 | $10,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
No real cost edge either way
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Brooklyn Park vs St. Paul
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Brooklyn Park | St. Paul |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $10,650–$21,000 |
| Standing-seam steel | $21,000–$40,600 | $21,000–$40,600 |
| Aluminum | $16,400–$32,550 | $16,400–$32,550 |
| Copper | $34,850–$69,350 | $34,850–$69,350 |
| Zinc | $32,550–$63,600 | $32,550–$63,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Brooklyn Park vs St. Paul
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brooklyn Park | St. Paul |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $9,500–$18,700 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $12,950–$26,750 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $15,250–$34,850 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $18,700–$41,750 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $22,150–$48,650 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Brooklyn Park vs St. Paul
Is metal roof installation cheaper in Brooklyn Park or St. Paul?
There's no meaningful difference: metal roof installation runs about $25,050 in both places.
Why does metal roof installation cost more in St. Paul than Brooklyn Park?
Labor rates explain most of it — 1.11 in St. Paul vs 1.11 in Brooklyn Park. A cold climate versus cold accounts for the rest.
How much is metal roof installation in Brooklyn Park, MN?
metal roof installation in Brooklyn Park runs $15,250–$34,850 as of 2026 — most jobs land near $25,050.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $36.7/hr in the Minneapolis-St. Paul-Bloomington area versus $36.7/hr around Minneapolis-St. Paul-Bloomington (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Brooklyn Park and St. Paul (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Brooklyn Park and St. Paul. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik