Metal Roof Installation cost: Brooklyn Park vs Duluth (2026)
Brooklyn Park runs 18% higher than Duluth for metal roof installation — expect around $25,050 in Brooklyn Park against $21,150 in Duluth, a difference of about $3,900.
Brooklyn Park MN
Typically around $25,050
Duluth MN
Lower costTypically around $21,150
Brooklyn Park vs Duluth: full breakdown
| Factor | Brooklyn Park | Duluth |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,150 |
| Estimated range | $15,250–$34,850 | $12,900–$29,400 |
| Labor index (vs US) | ×1.11 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,700 |
| Materials/equipment | $10,000 | $8,450 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
A 18% spread (roughly $3,900) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Brooklyn Park typically recover some of it.
Metal roof installation by type: Brooklyn Park vs Duluth
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Brooklyn Park | Duluth |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,000–$17,750 |
| Standing-seam steel | $21,000–$40,600 | $17,750–$34,250 |
| Aluminum | $16,400–$32,550 | $13,850–$27,450 |
| Copper | $34,850–$69,350 | $29,400–$58,550 |
| Zinc | $32,550–$63,600 | $27,450–$53,650 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Brooklyn Park vs Duluth
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brooklyn Park | Duluth |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,000–$15,800 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $10,950–$22,600 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $12,900–$29,400 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $15,800–$35,200 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $18,700–$41,050 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Duluth; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Brooklyn Park vs Duluth
Is metal roof installation cheaper in Brooklyn Park or Duluth?
In 2026, metal roof installation is cheaper in Duluth at about $21,150, versus $25,050 in Brooklyn Park — a difference of about $3,900 (18%).
Why does metal roof installation cost more in Brooklyn Park than Duluth?
The main driver is local labor rates: Brooklyn Park's labor index is 1.11 versus 0.93 in Duluth. Climate zone (cold vs cold) and permit fees also shift the total.
How much is metal roof installation in Brooklyn Park, MN?
Brooklyn Park homeowners can expect $15,250 to $34,850 for metal roof installation in 2026, with $25,050 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Brooklyn Park and Duluth: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $3,900 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Brooklyn Park can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik