Metal Roof Installation cost: Bloomington vs Brooklyn Park (2026)
In 2026, Bloomington and Brooklyn Park land on nearly identical metal roof installation pricing — about $25,050 either way.
Bloomington MN
Typically around $25,050
Brooklyn Park MN
Typically around $25,050
Bloomington vs Brooklyn Park: full breakdown
| Factor | Bloomington | Brooklyn Park |
|---|---|---|
| Typical 2026 cost | $25,050 | $25,050 |
| Estimated range | $15,250–$34,850 | $15,250–$34,850 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $15,050 | $15,050 |
| Materials/equipment | $10,000 | $10,000 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Bloomington vs Brooklyn Park
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bloomington | Brooklyn Park |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $10,650–$21,000 |
| Standing-seam steel | $21,000–$40,600 | $21,000–$40,600 |
| Aluminum | $16,400–$32,550 | $16,400–$32,550 |
| Copper | $34,850–$69,350 | $34,850–$69,350 |
| Zinc | $32,550–$63,600 | $32,550–$63,600 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Bloomington vs Brooklyn Park
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bloomington | Brooklyn Park |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $9,500–$18,700 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $12,950–$26,750 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $15,250–$34,850 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $18,700–$41,750 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $22,150–$48,650 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Bloomington vs Brooklyn Park
Is metal roof installation cheaper in Bloomington or Brooklyn Park?
metal roof installation costs about the same in both — roughly $25,050 in each city.
Why does metal roof installation cost more in Brooklyn Park than Bloomington?
Brooklyn Park's higher labor index (1.11 vs 1.11 in Bloomington) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Bloomington, MN?
metal roof installation in Bloomington runs $15,250–$34,850 as of 2026 — most jobs land near $25,050.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bloomington and Brooklyn Park, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Bloomington and Brooklyn Park cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik