Metal Roof Installation cost: Brentwood vs Nashville (2026)
In 2026, Brentwood and Nashville land on nearly identical metal roof installation pricing — about $21,050 either way.
Brentwood TN
Typically around $21,050
Nashville TN
Typically around $21,050
Brentwood vs Nashville: full breakdown
| Factor | Brentwood | Nashville |
|---|---|---|
| Typical 2026 cost | $21,050 | $21,050 |
| Estimated range | $12,850–$29,250 | $12,850–$29,250 |
| Labor index (vs US) | ×0.97 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $12,650 | $12,650 |
| Materials/equipment | $8,400 | $8,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Brentwood vs Nashville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Brentwood | Nashville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,950–$17,650 | $8,950–$17,650 |
| Standing-seam steel | $17,650–$34,100 | $17,650–$34,100 |
| Aluminum | $13,800–$27,350 | $13,800–$27,350 |
| Copper | $29,250–$58,250 | $29,250–$58,250 |
| Zinc | $27,350–$53,450 | $27,350–$53,450 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Brentwood vs Nashville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brentwood | Nashville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,750 | $8,000–$15,750 |
| 1,500 sq ft (15 squares) | $10,900–$22,500 | $10,900–$22,500 |
| 2,000 sq ft (20 squares) | $12,850–$29,250 | $12,850–$29,250 |
| 2,500 sq ft (25 squares) | $15,750–$35,050 | $15,750–$35,050 |
| 3,000+ sq ft (30 squares) | $18,650–$40,850 | $18,650–$40,850 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Brentwood vs Nashville
Is metal roof installation cheaper in Brentwood or Nashville?
There's no meaningful difference: metal roof installation runs about $21,050 in both places.
Why does metal roof installation cost more in Nashville than Brentwood?
It comes down to labor: Nashville indexes at 0.97 against Brentwood's 0.97. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Brentwood, TN?
Expect to pay $12,850 to $29,250 for metal roof installation in Brentwood in 2026, averaging around $21,050.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $29.4/hr in the Nashville-Davidson--Murfreesboro--Franklin area and $29.4/hr in Nashville-Davidson--Murfreesboro--Franklin. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Brentwood and Nashville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Brentwood and Nashville — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik