Metal Roof Installation cost: Brentwood vs Clarksville (2026)
Budget-wise, metal roof installation in Brentwood ($21,050) runs 2% more than in Clarksville ($20,600), a roughly $450 spread.
Brentwood TN
Typically around $21,050
Clarksville TN
Lower costTypically around $20,600
Brentwood vs Clarksville: full breakdown
| Factor | Brentwood | Clarksville |
|---|---|---|
| Typical 2026 cost | $21,050 | $20,600 |
| Estimated range | $12,850–$29,250 | $12,550–$28,650 |
| Labor index (vs US) | ×0.97 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $250 |
| Labor share | $12,650 | $12,350 |
| Materials/equipment | $8,400 | $8,250 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
2% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Metal roof installation by type: Brentwood vs Clarksville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Brentwood | Clarksville |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,950–$17,650 | $8,750–$17,300 |
| Standing-seam steel | $17,650–$34,100 | $17,300–$33,350 |
| Aluminum | $13,800–$27,350 | $13,500–$26,750 |
| Copper | $29,250–$58,250 | $28,650–$57,000 |
| Zinc | $27,350–$53,450 | $26,750–$52,300 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Brentwood vs Clarksville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Brentwood | Clarksville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,000–$15,750 | $7,800–$15,400 |
| 1,500 sq ft (15 squares) | $10,900–$22,500 | $10,650–$22,000 |
| 2,000 sq ft (20 squares) | $12,850–$29,250 | $12,550–$28,650 |
| 2,500 sq ft (25 squares) | $15,750–$35,050 | $15,400–$34,300 |
| 3,000+ sq ft (30 squares) | $18,650–$40,850 | $18,200–$40,000 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Brentwood vs Clarksville
Is metal roof installation cheaper in Brentwood or Clarksville?
Yes — Brentwood costs more. Expect around $21,050 for metal roof installation there against $20,600 in Clarksville, about $450 (2%) apart in 2026.
Why does metal roof installation cost more in Brentwood than Clarksville?
It comes down to labor: Brentwood indexes at 0.97 against Clarksville's 0.95. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Brentwood, TN?
Expect to pay $12,850 to $29,250 for metal roof installation in Brentwood in 2026, averaging around $21,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Brentwood and Clarksville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not really — the $450 gap is one-time, and smart timing and tighter quotes in Brentwood can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik