Roofing · Brentwood, TN
How much does metal roof installation cost in Brentwood, TN? (2026)
In Brentwood, metal roof installation runs $12,850–$29,250, with most paying around $21,050 — about 2% below the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,050
- Typical cost
- $21,050
- Labor vs US
- −3%
- Climate
- Mixed
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Brentwood
- $12,850 on the low end, $29,250 on the high — metal roof installation in Brentwood averages $21,050, about 2% below the national average.
- Local labor in Brentwood is −3% relative to the national average, which is what pushes this estimate away from the countrywide number.
- The estimate already covers the Roofing permit — roughly $275 in Brentwood.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Skip peak pricing by scheduling in Late spring to early fall (dry, 45–85°F); the shift is worth about 5–10%.
What goes into the price in Brentwood
A typical Brentwood metal roof installation of $21,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Brentwood 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $5,050 – $11,600 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $7,525 – $17,375 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $275 |
| Total installed cost | $12,850 – $29,250 |
Split from the Brentwood estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Brentwood
- Labor in Brentwood runs about 3% below the national average (based on price levels for the Nashville-Davidson--Murfreesboro--Franklin metro area), which lowers the installed price.
- A Roofing permit in Brentwood costs around $275, included above.
Metal Roof Installation cost by roof size in Brentwood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Brentwood 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,000 – $15,750 |
| 1,500 sq ft (15 squares) | $10,900 – $22,500 |
| 2,000 sq ft (20 squares) | $12,850 – $29,250 |
| 2,500 sq ft (25 squares) | $15,750 – $35,050 |
| 3,000+ sq ft (30 squares) | $18,650 – $40,850 |
National size ranges localized to Brentwood labor and climate.
Metal Roof Installation cost by type in Brentwood
| Corrugated steel (exposed fastener) | $9,000 – $17,750 |
| Standing-seam steel | $17,750 – $34,250 |
| Aluminum | $13,850 – $27,450 |
| Copper | $29,400 – $58,500 |
| Zinc | $27,450 – $53,650 |
Adjusted to Brentwood from national type-level ranges.
Metal Roof Installation cost by efficiency in Brentwood
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,000 – $17,650 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $12,850 – $29,250 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,450 – $48,600 |
Labor vs. materials in Brentwood
Install crew, removal, permit & startup — the part Brentwood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,050 Brentwood project; your mix varies with scope.
Skilled installers in the Nashville-Davidson--Murfreesboro--Franklin area earn about $29.4/hr (6% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Brentwood labor adjustment | ×0.97 |
| mixed climate factor | ×1 |
| Local permit | +$275 |
| Brentwood estimate | $12,850 – $29,250 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
These hit some bids and skip others. The deciding factors are your home's condition, layout and what the crew finds once work begins.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off of the old roof
- Labor, cleanup and permit
- Underlayment, fasteners and trim
- Metal panels or standing-seam system
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Whether existing roof can be overlaid
Ways to save on metal roof installation in Brentwood
- Metal's 40–70 yr life lowers lifetime cost
- Some insurers discount metal and impact-rated roofs
- Compare lifetime cost, not just the install price
- Steel standing seam balances cost and longevity
How long does metal roof installation last in Brentwood?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Brentwood
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Brentwood?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Brentwood, TN
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Brentwood, TN labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,800–$11,650 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,750–$15,500 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,450–$31,050 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,400–$38,800 | $450/yr |
Per-square ranges are national installed benchmarks localized to Brentwood, TN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Brentwood
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why metal roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Verify the contractor is licensed, insured and local, with recent references.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Brentwood Roofing pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Brentwood
How much does metal roof installation cost in Brentwood, TN?
The low end sits near $12,850 and the high end near $29,250 for metal roof installation in Brentwood this 2026, with $21,050 the common middle. Local labor, the mixed climate and permit fees are all baked into that number.
Is metal roof installation more expensive in Brentwood than average?
Brentwood is about 2% lower than the national average, mainly because local labor runs at an index of 0.97 relative to the US average. — the local Roofing permit, about $275, is part of that too.
Do I need a permit for metal roof installation in Brentwood?
Budget about $275 for the Roofing permit most Brentwood jobs like this require — and note it already sits inside the estimate above, not on top of it.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Where two homes diverge is in the details below. Grade of equipment and materials tops the list, followed by home size and complexity, local labor, and the mixed climate zone.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Brentwood using the BLS metro wage data labor index (×0.97 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Brentwood metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Brentwood
Homeowners in Brentwood often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Brentwood
Browse local 2026 costs for every home project in Brentwood, TN.