Metal Roof Installation cost: Beaumont vs Fort Worth (2026)
Budget-wise, metal roof installation in Beaumont ($21,200) runs 3% less than in Fort Worth ($21,850), a roughly $650 spread.
Beaumont TX
Lower costTypically around $21,200
Fort Worth TX
Typically around $21,850
Beaumont vs Fort Worth: full breakdown
| Factor | Beaumont | Fort Worth |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,850 |
| Estimated range | $12,900–$29,500 | $13,300–$30,350 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $250 | $300 |
| Labor share | $12,700 | $13,100 |
| Materials/equipment | $8,500 | $8,750 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Beaumont vs Fort Worth
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Beaumont | Fort Worth |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,000–$17,800 | $9,300–$18,300 |
| Standing-seam steel | $17,800–$34,350 | $18,300–$35,350 |
| Aluminum | $13,900–$27,550 | $14,300–$28,350 |
| Copper | $29,500–$58,700 | $30,350–$60,350 |
| Zinc | $27,550–$53,850 | $28,350–$55,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Beaumont vs Fort Worth
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beaumont | Fort Worth |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $10,950–$22,650 | $11,300–$23,300 |
| 2,000 sq ft (20 squares) | $12,900–$29,500 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $15,850–$35,350 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,300–$42,350 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Beaumont; we use Texas regional price parity instead.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Beaumont vs Fort Worth
Is metal roof installation cheaper in Beaumont or Fort Worth?
Beaumont wins on price: metal roof installation runs about $21,200 there versus $21,850 in Fort Worth, a gap of roughly $650 (3%) as of 2026.
Why does metal roof installation cost more in Fort Worth than Beaumont?
Fort Worth's higher labor index (0.97 vs 0.95 in Beaumont) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Beaumont, TX?
Expect to pay $12,900 to $29,500 for metal roof installation in Beaumont in 2026, averaging around $21,200.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Beaumont and Fort Worth, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $650 is a real gap, but it's a one-time cost you can partly offset in Fort Worth with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik