Metal Roof Installation cost: Beaumont vs Dallas (2026)
Budget-wise, metal roof installation in Beaumont ($21,200) runs 3% less than in Dallas ($21,850), a roughly $650 spread.
Beaumont TX
Lower costTypically around $21,200
Dallas TX
Typically around $21,850
Beaumont vs Dallas: full breakdown
| Factor | Beaumont | Dallas |
|---|---|---|
| Typical 2026 cost | $21,200 | $21,850 |
| Estimated range | $12,900–$29,500 | $13,300–$30,350 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $250 | $300 |
| Labor share | $12,700 | $13,100 |
| Materials/equipment | $8,500 | $8,750 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Beaumont vs Dallas
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Beaumont | Dallas |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,000–$17,800 | $9,300–$18,300 |
| Standing-seam steel | $17,800–$34,350 | $18,300–$35,350 |
| Aluminum | $13,900–$27,550 | $14,300–$28,350 |
| Copper | $29,500–$58,700 | $30,350–$60,350 |
| Zinc | $27,550–$53,850 | $28,350–$55,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Beaumont vs Dallas
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beaumont | Dallas |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,850 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $10,950–$22,650 | $11,300–$23,300 |
| 2,000 sq ft (20 squares) | $12,900–$29,500 | $13,300–$30,350 |
| 2,500 sq ft (25 squares) | $15,850–$35,350 | $16,300–$36,350 |
| 3,000+ sq ft (30 squares) | $18,750–$41,150 | $19,300–$42,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Beaumont; we use Texas regional price parity instead.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Beaumont vs Dallas
Is metal roof installation cheaper in Beaumont or Dallas?
Beaumont wins on price: metal roof installation runs about $21,200 there versus $21,850 in Dallas, a gap of roughly $650 (3%) as of 2026.
Why does metal roof installation cost more in Dallas than Beaumont?
Labor rates explain most of it — 0.97 in Dallas vs 0.95 in Beaumont. A hot climate versus hot, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Beaumont, TX?
In Beaumont, metal roof installation typically runs $12,900–$29,500 in 2026, with most homeowners paying around $21,200.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Beaumont and Dallas: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Rarely. The $650 difference is real but one-time, and you can often close most of it in Dallas by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik