Metal Roof Installation cost: Arlington Heights vs Joliet (2026)
Metal roof installation costs about the same in Arlington Heights and Joliet in 2026 — roughly $25,700 in each.
Arlington Heights IL
Typically around $25,700
Joliet IL
Typically around $25,700
Arlington Heights vs Joliet: full breakdown
| Factor | Arlington Heights | Joliet |
|---|---|---|
| Typical 2026 cost | $25,700 | $25,700 |
| Estimated range | $15,650–$35,700 | $15,650–$35,700 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $15,400 | $15,400 |
| Materials/equipment | $10,300 | $10,300 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Arlington Heights vs Joliet
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Arlington Heights | Joliet |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,900–$21,550 | $10,900–$21,550 |
| Standing-seam steel | $21,550–$41,600 | $21,550–$41,600 |
| Aluminum | $16,850–$33,350 | $16,850–$33,350 |
| Copper | $35,700–$71,100 | $35,700–$71,100 |
| Zinc | $33,350–$65,200 | $33,350–$65,200 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Arlington Heights vs Joliet
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Arlington Heights | Joliet |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,750–$19,200 | $9,750–$19,200 |
| 1,500 sq ft (15 squares) | $13,300–$27,450 | $13,300–$27,450 |
| 2,000 sq ft (20 squares) | $15,650–$35,700 | $15,650–$35,700 |
| 2,500 sq ft (25 squares) | $19,200–$42,800 | $19,200–$42,800 |
| 3,000+ sq ft (30 squares) | $22,750–$49,900 | $22,750–$49,900 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Arlington Heights vs Joliet
Is metal roof installation cheaper in Arlington Heights or Joliet?
Not really — both cities land at almost the same number for metal roof installation, around $25,700 each.
Why does metal roof installation cost more in Joliet than Arlington Heights?
Joliet's higher labor index (1.14 vs 1.14 in Arlington Heights) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Arlington Heights, IL?
Arlington Heights homeowners can expect $15,650 to $35,700 for metal roof installation in 2026, with $25,700 the typical number.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.1/hr around Chicago-Naperville-Elgin versus $38.1/hr near Chicago-Naperville-Elgin. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Arlington Heights and Joliet: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Arlington Heights and Joliet — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik